Features:
- 450 MHz MPC750 processor and 1MB L2 cache
- 512MB ECC SDRAM with 17MB onboard Flash
- IEEE 1101 front-panel configuration and dual Ethernet
Motorola uses -0163 for the 450 MHz MPC750 configuration fitted with 512MB ECC SDRAM, 17MB Flash, a 1MB L2 cache, and IEEE 1101 mechanics. The front-panel style is the key ordering distinction from the otherwise similar -0161 build.
The single-board computer unifies processing, protected memory, network communication, serial service access, PMC expansion, and VMEbus transfers. It can therefore support embedded control and data-handling functions without adding a separate processor card.
Before installation, verify IEEE 1101 handle compatibility, P1/P2 engagement, rear I/O routing, firmware revision, PMC power demand, and console settings. The enclosure must provide the documented cooling path and suitable access to front-panel connectors.
The Motorola MVME5100-0163 VMEbus Single-Board Computer may still be available for quotation and support from Apter Power beyond manufacturer End-Of-Life (EOL).
Motorola MVME5100-0163 VMEbus Single-Board Computer Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME5100-0163 VMEbus Single-Board Computer Specs
General
- ManufacturerMotorola VME
- ModelMVME5100-0163
- ConditionNew Original ready stock
- Product FamilyMVME5100 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Memory Organization
- ECC SDRAM: 512MB ECC SDRAM provides protected working memory for the board.
- Flash: 17MB Flash stores firmware and application resources documented for this configuration.
- L2 Cache: 1MB L2 cache supports high-speed processor memory access.
- Data Integrity: ECC memory supports detection and correction of single-bit memory errors.
Communication Resources
- Ethernet: Dual 10/100BaseT interfaces support network communication from the single-board computer.
- Serial I/O: Two serial channels provide console or application communication according to the installed cabling.
- VMEbus: The VMEbus interface connects the processor module to the host backplane and other cards.
- PMC Expansion: PMC sites support compatible mezzanine functions when the power, mechanics, and software requirements are met.
System Integration Checks
- Front Panel: IEEE 1101 identifies the mechanical front-panel configuration for this ordering code.
- Firmware: Verify the monitor, boot image, and operating-system support before deployment.
- I/O Routing: Confirm front and rear connector routing against the selected transition hardware.
- Thermal Design: Maintain the airflow required by the host VME chassis and installed mezzanine devices.