Features:
- 25 MHz MC68LC040 processor
- 4MB DRAM without parity
- Ethernet interface without SCSI
Motorola lists MVME162-412 in the MVME162FX 400/500 Series with a 25 MHz MC68LC040, 4MB non-parity DRAM, Ethernet, four IndustryPack interfaces, and two serial ports.
The controller combines VMEbus processing, network communication, serial I/O, and modular IndustryPack expansion for compatible embedded automation systems.
Confirm master and slave addressing, D08-D64 transfer requirements, BLT/MBLT compatibility, P2 transition connections, jumper settings, and forced-air cooling before installation.
The Motorola VME MVME162-412 MVME162FX VME Embedded Controller may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Motorola VME MVME162-412 MVME162FX VME Embedded Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola VME MVME162-412 MVME162FX VME Embedded Controller Specs
General
- ManufacturerMotorola VME
- ModelMVME162-412
- ConditionNew Original ready stock
- Product FamilyMVME162FX 400/500 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Onboard memory resources
- DRAM: 4MB onboard DRAM without parity.
- SRAM: Battery-backed static RAM.
- Firmware storage: Flash memory for monitor/debugger firmware.
- NVRAM: Battery-backed NVRAM and time-of-day clock.
Network and VME connections
- Network: Ethernet interface.
- Storage: No SCSI interface.
- VMEbus: A16-A32 master and A24-A32 slave addressing with D08-D64, BLT/MBLT.
- Expansion I/O: Two serial ports and four IndustryPack interfaces.
Chassis and installation checks
- Compatibility: Verify VME chassis and backplane compatibility before insertion.
- Configuration: Confirm jumper and system-controller settings against the Motorola manual.
- Cooling: Maintain an operating range of 0°C to +70°C with forced-air cooling.
- Handling: Use antistatic precautions and remove chassis power before installation.