Features:
- MPC604 PowerPC processor with 16MB ECC-protected DRAM
- One IEEE P1386.1 compatible 32/64-bit PMC expansion slot
- MVME761-compatible P2 I/O for Ethernet, SCSI, serial, and parallel connections
The MVME2604-1121 ordering configuration combines the MPC604 processor with 16MB of ECC-protected DRAM in the MVME2600 architecture.
Its PCI, VMEbus, SCSI, Ethernet, serial, and parallel resources support embedded control systems that need processor and field I/O integration.
Confirm MVME761 mode, P2 cabling, chassis airflow, and the installed PMC before applying power to this early configuration.
The Motorola MVME2604-1121 VME Processor Module may still be available for quotation and support from Apter Power beyond manufacturer End-Of-Life (EOL).
Motorola MVME2604-1121 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2604-1121 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2604-1121
- ConditionNew Original ready stock
- Product FamilyMVME2600 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ECC memory and boot resources
- ECC protection: The 16MB DRAM configuration supports single-bit correction and double-bit error detection.
- Memory control: The Falcon chipset manages the two-way interleaved processor memory domain.
- Boot storage: Socketed Flash and RAM200 Flash banks provide firmware storage resources.
- Nonvolatile data: Battery-backed NVRAM and the time-of-day clock retain configuration data.
MVME761 signal routing
- Ethernet path: Network signals are routed through P2 to the matching MVME761 assembly.
- SCSI path: The SCSI interface uses the selected P2 adapter and transition-module cabling.
- Serial channels: Asynchronous and synchronous serial functions depend on the installed interface modules.
- Parallel interface: The parallel-port signals are presented through the MVME761 connection.
Chassis preparation checks
- Backplane: Confirm the VME slot and P1/P2 connector arrangement before insertion.
- Cooling: Maintain forced-air cooling across the processor and memory components.
- PMC option: Verify electrical and mechanical suitability of the installed mezzanine card.
- Cabling: Match the P2 adapter and MVME761 cables exactly as shown in the manual.