Features:
- 60 MHz MC68060 processor
- 32MB SDRAM and 2MB flash memory
- Two IndustryPack expansion positions
MVME172PA-652SE is the MVME172P2 configuration documented with a 60 MHz MC68060, 32MB SDRAM, 2MB flash memory, SCSI, Ethernet, and two IndustryPack slots.
Its IndustryPack positions add modular I/O flexibility while the Ethernet and SCSI controllers handle network and peripheral communication within a compatible VME system.
A system review should cover IndustryPack module support, P1/P2 wiring, transition equipment, boot firmware, memory expectations, and cooling so that this exact P2 configuration matches the existing installation.
Apter Power supports enquiries for the Motorola MVME172PA-652SE MVME172P2 VME Embedded Controller, including documentation and configuration review.
Motorola MVME172PA-652SE MVME172P2 VME Embedded Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME172PA-652SE MVME172P2 VME Embedded Controller Specs
General
- ManufacturerMotorola VME
- ModelMVME172PA-652SE
- ConditionNew Original ready stock
- Product FamilyMVME172P2
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
MC68060, SDRAM, and flash resources
- Processor: This configuration uses a 60 MHz MC68060 for MVME172PA-652SE.
- Main memory: The board is fitted with 32MB SDRAM.
- Firmware: A documented 2MB flash resource stores resident firmware for the MVME172P2 configuration.
- Board role: Processing and memory are combined with IndustryPack expansion in the MVME172P2 board architecture.
IndustryPack and communication options
- SCSI: MVME172PA-652SE provides the documented storage/peripheral interface for supported devices.
- Ethernet: Its onboard Ethernet controller supplies the network path defined for this ordering configuration.
- IndustryPack: Two IndustryPack positions accept compatible modular I/O while preserving the VME controller role.
- System connection: Transition hardware and backplane routing determine how the onboard interfaces reach external equipment.
MVME172P2 expansion planning
- Board format: Reserve the specified VME slot and confirm room for IndustryPack hardware and the required transition connections.
- P1/P2 interface: Connector use and transition-module wiring must follow the Motorola installation drawing for this exact board.
- Cooling: Cooling must cover both the controller and installed IndustryPack modules within Motorola's stated limits.
- Final check: Verify IndustryPack modules, firmware, peripheral cabling, and the complete PA-652SE identity before startup.