Features:
- 333 MHz MPC604 processor with 128MB ECC DRAM
- 9MB Flash and an IEEE 1101 compatible front panel
- MVME761 I/O with one 32/64-bit PMC expansion slot
MVME2604-1351 is part of the official 333 MHz MVME2604-1321 through MVME2604-1361 range and uses 128MB ECC DRAM.
The configuration combines 9MB Flash, IEEE 1101 handles, VME64 operation, PCI resources, and MVME761 external I/O.
Check the memory code, front-panel style, P2 adapter, PMC rear-I/O requirements, and chassis cooling before selecting this module.
The Motorola MVME2604-1351 VME Processor Module may still be available for quotation and support from Apter Power beyond manufacturer End-Of-Life (EOL).
Motorola MVME2604-1351 VME Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME2604-1351 VME Processor Module Specs
General
- ManufacturerMotorola VME
- ModelMVME2604-1351
- ConditionNew Original ready stock
- Product FamilyMVME2600 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
333 MHz processing resources
- Processor: The module uses a 333 MHz MPC604 PowerPC processor.
- Memory: Its 128MB ECC DRAM is managed by the Falcon chipset.
- Flash: The ordering group includes 9MB of firmware Flash storage.
- Bus path: Raven and Universe connect processor, PCI, and VMEbus operations.
PMC and carrier options
- PMC slot: One IEEE P1386.1 compatible 32/64-bit PMC position is onboard.
- Rear signals: PMC rear I/O requires the suitable five-row VME connector arrangement.
- Carrier support: A compatible expansion carrier can add PMC capacity.
- Power planning: Review mezzanine power and airflow as part of the chassis configuration.
IEEE 1101 system checks
- Front panel: Injector/ejector handles support controlled module insertion and removal.
- Transition I/O: Use the MVME761 transition module and matching P2 adapter.
- Network and SCSI: Confirm Ethernet and SCSI cabling before system start-up.
- Environment: Operate between 0 and 55 °C entry air with forced cooling.