Features:
- 1.267 GHz MPC7457 PowerPC processor
- 512 MB onboard DDR266 ECC SDRAM
- Scanbe ejector handles for this order code
Official ordering information assigns MVME6100-0161 to the 512 MB Scanbe-handle configuration within the MVME6100 family.
Dual Gigabit Ethernet, two PMC-X sites, serial channels, flash, NVRAM, and the Tsi148 bridge support embedded VME computing and communication tasks.
Match MVME6100-0161 by its complete suffix, Scanbe hardware, backplane role, mezzanine voltage, firmware, and forced-air cooling requirements before installation.
The Motorola MVME6100-0161 VMEbus Single-Board Computer is recorded as Active / Available from OEM; documentation and system-review support are available from Apter Power.
Motorola MVME6100-0161 VMEbus Single-Board Computer Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME6100-0161 VMEbus Single-Board Computer Specs
General
- ManufacturerMotorola
- ModelMVME6100-0161
- ConditionNew and Original
- Product FamilyMVME6100 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Processor and memory architecture
- Processor: The 1.267 GHz MPC7457 provides PowerPC execution with a 128-bit AltiVec unit.
- Cache: The processor supplies 512 KB of L2 cache and 2 MB of L3 cache.
- System controller: The Marvell MV64360 coordinates the processor, DDR memory, and local PCI resources.
- ECC memory: MVME6100-0161 is configured with 512 MB of onboard DDR266 SDRAM using ECC.
Backplane transfer resources
- VME bridge: The Tundra Tsi148 implements the board connection to the VME backplane.
- Transfer protocol: VME64 and 2eSST transfers are supported under documented system conditions.
- Sustained rate: The published 2eSST capability reaches up to 320 MB/s in a compatible platform.
- System role: Slot position, system-controller settings, P1 and P2 connectivity, and backplane support must be verified.
Mezzanine and service interfaces
- PMC-X sites: Two 64-bit positions support documented 33, 66, or 100 MHz mezzanine operation.
- Networking: Two 10/100/1000BaseT interfaces provide Ethernet connectivity.
- Serial service: Two 16550-compatible asynchronous ports support console and service access.
- Configuration identity: The 512 MB memory and Scanbe handles distinguish the MVME6100-0161 ordering option.