Features:
- 400 MHz MPC7410 processor with AltiVec execution resources
- 512MB ECC SDRAM, 17MB Flash, and 2MB L2 cache
- Scanbe front-panel configuration for the -2261 ordering code
The MVME5110-2261 ordering code identifies the 400 MHz MPC7410 configuration with 512MB ECC SDRAM, 17MB Flash, a 2MB L2 cache, and Scanbe front-panel hardware.
Dual 10/100BaseT Ethernet, serial interfaces, SCSI, two PMC sites, and VME64 resources allow the board to support embedded control and communication tasks in compatible VME systems.
Before installation, confirm the complete order code together with chassis, backplane, firmware, rear I/O, PMC, Scanbe panel, and forced-air cooling requirements in the official Motorola documentation.
The Motorola MVME5110-2261 VMEbus Single-Board Computer may still be available for quotation and support from Apter Power beyond manufacturer End-Of-Life (EOL).
Motorola MVME5110-2261 VMEbus Single-Board Computer Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME5110-2261 VMEbus Single-Board Computer Specs
General
- ManufacturerMotorola VME
- ModelMVME5110-2261
- ConditionNew Original ready stock
- Product FamilyMVME5100 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Memory Organization
- ECC SDRAM: 512MB ECC SDRAM provides protected working memory for the board.
- Flash: 17MB Flash stores firmware and application resources documented for this configuration.
- L2 Cache: 2MB L2 cache supports high-speed processor memory access.
- Data Integrity: ECC memory supports detection and correction of single-bit memory errors.
Communication Resources
- Ethernet: Dual 10/100BaseT interfaces support network communication from the single-board computer.
- Serial I/O: Two serial channels provide console or application communication according to the installed cabling.
- VMEbus: The VMEbus interface connects the processor module to the host backplane and other cards.
- PMC Expansion: PMC sites support compatible mezzanine functions when the power, mechanics, and software requirements are met.
System Integration Checks
- Front Panel: Scanbe identifies the mechanical front-panel configuration for this ordering code.
- Firmware: Verify the monitor, boot image, and operating-system support before deployment.
- I/O Routing: Confirm front and rear connector routing against the selected transition hardware.
- Thermal Design: Maintain the airflow required by the host VME chassis and installed mezzanine devices.