Features:
- 512 MB DDR ECC memory
- Scanbe handles in the 6E configuration
- Officially identified old part number
The official cross-reference identifies MVME61006E-0161 as the earlier 512 MB Scanbe-handle order code and pairs it with MVME61006E-0161R.
Processing, network, serial, PMC-X, and Tsi148 VME resources remain tied to the complete MVME61006E-0161 configuration rather than to the family name alone.
When planning migration, compare the old and new codes for chassis fit, front-panel hardware, firmware, rear I/O, mezzanine cards, and thermal conditions.
Motorola MVME61006E-0161 VMEbus Single-Board Computer is recorded as Discontinued / Obsolete by OEM; Apter Power can review documented sourcing options.
Motorola MVME61006E-0161 VMEbus Single-Board Computer Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME61006E-0161 VMEbus Single-Board Computer Specs
General
- ManufacturerMotorola
- ModelMVME61006E-0161
- ConditionNew and Original
- Product FamilyMVME6100 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Ordering-code characteristics
- Part-number role: MVME61006E-0161 is listed as the old part number for this 6E board configuration.
- Memory option: The code specifies 512 MB of onboard DDR266 SDRAM with ECC.
- Handle style: Scanbe ejector handles distinguish this version from the corresponding IEEE-handle code.
- Processing base: The board uses the 1.267 GHz MPC7457 and the MV64360 controller architecture.
External and backplane connections
- Ethernet: Two Gigabit Ethernet interfaces support network attachment.
- Serial access: Two asynchronous serial channels provide console and service connectivity.
- VMEbus: The Tsi148 bridge supports VME64 and documented 2eSST transfers.
- Mezzanine I/O: Two PMC-X sites provide expansion, subject to voltage, rear-I/O, and mechanical checks.
Old-to-new code review
- Cross-reference: Official ordering information pairs MVME61006E-0161 with the newer MVME61006E-0161R code.
- Configuration match: Memory capacity and Scanbe handle hardware must remain consistent during evaluation.
- Platform checks: Compare VME slot, P1 and P2 signals, PMC modules, Ethernet routing, and forced-air cooling.
- Software continuity: Verify firmware, boot settings, drivers, and application behavior before approving a replacement.