Features:
- Complete valve configuration: The suffix preserves electrical, manual-override and tubing decisions in one order identity.
- Double-solenoid state control: Separate coils command the two spool positions while the control sequence governs state retention.
- Serviceable body-ported layout: The single-valve arrangement keeps field tubing associated with one identified station.
SY5220-5LZD-C6 is a double-solenoid directional valve, so recovery behavior depends on the last command and pneumatic circuit.
The L-plug lead, surge protection and manual override are part of the exact order code and must not be dropped from a replacement request.
Commissioning should prove both coil commands, actuator direction, exhaust paths and behavior after energy interruption.
Apter Power can help confirm the SMC SY5220-5LZD-C6 SY5000 Two-Position Double Solenoid Valve, electrical suffix and tubing configuration before quotation.
SMC SY5220-5LZD-C6 SY5000 Two-Position Double Solenoid Valve Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Full suffix: Preserve every character because voltage, connector, protection, override and fitting choices are encoded.
- Actuation type: Confirm the machine requires a two-position double solenoid rather than spring return.
- Flow path: Match supply, work and exhaust connections to the existing actuator circuit.
- Accessory scope: State whether brackets, silencers, cables or manifolds are included separately.
- Voltage match: Verify the controller output and power supply before energizing either coil.
- Polarity control: Follow the L-plug lead and suppression-circuit wiring rather than generic valve colors.
- Command interlock: Prevent both coils from being driven at the same time.
- Manual override: Return the locking override to the normal position before automatic operation.
- Coil isolation: Command each side separately to distinguish electrical loss from a stuck spool.
- Pressure proof: Verify supply and exhaust availability before condemning a valve that does not shift.
- Tube routing: Reversed A and B lines can produce correct shifting with wrong actuator direction.
- Suppression state: A damaged connector or protection circuit can remove one command path while the valve remains mechanically sound.
- Double-acting cylinders: Alternates pressure between two work ports for controlled extension and retraction.
- Pneumatic sequencing: Holds the last spool command as part of a designed machine-state strategy.
- Compact valve stations: Provides a body-ported single unit where a manifold is unnecessary.
- Exact service replacement: Restores a documented SY5220-5LZD-C6 position without discarding suffix-specific interfaces.