Features:
- Provides the active bus position for two redundant IM 153 modules.
- Keeps ET 200M backplane wiring in place during interface-module replacement.
- Uses conformal coating for the documented SIPLUS environmental range.
Siemens 6AG1195-7HD10-2XA0 joins the redundant interface pair to one ET 200M I/O backplane.
The active bus design separates interface-module replacement from the fixed station wiring.
SIPLUS coating changes the environmental construction, not the required IM 153 redundancy arrangement.
The Siemens 6AG1195-7HD10-2XA0 Redundant IM 153 Active Bus Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AG1195-7HD10-2XA0 Redundant IM 153 Active Bus Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Two-interface arrangement
- IM positions: The bus module accepts two redundant IM 153 interface modules.
- Shared station: Both interfaces serve the same ET 200M I/O backplane.
- Active path: The control system selects the available communication interface.
- Replacement: One interface can be removed while the station wiring remains on the bus module.
Fixed station connection
- Backplane route: The active bus connects the interface pair to the installed I/O modules.
- Wiring boundary: Field wiring stays on the ET 200M modules and terminal assemblies.
- Hot replacement: The bus position avoids removing the station backplane when an IM is exchanged.
- Base hardware: The mechanical and bus design is based on 6ES7195-7HD10-0XA0.
Protected construction
- Coating: Conformal coating protects the populated assembly from documented contaminants.
- Condensation: The SIPLUS rating covers humidity including condensation and frost conditions.
- Chemical class: The general industrial classification extends to class 3C4.
- Biological class: The assembly is rated for class 3B2 biological substances.
Installation boundaries
- Temperature: Use the documented -40 to +70 °C range with the stated cold-start limit.
- Altitude: Apply temperature derating above the catalog reference altitude.
- Marine use: Separate 6B2, 6C3, and 6S3 classes apply to shipboard conditions.
- Approval check: Hazardous-area certificates may narrow the permitted ambient range.