Features:
- Seven Fast Ethernet RJ45 ports connect copper devices while three Gigabit multimode SC ports provide optical links.
- Managed VLAN, multicast, diagnostics, and mirroring functions control and observe traffic on the same switching fabric.
- C-PLUG configuration storage and multiple ring or spanning-tree protocols support controlled network recovery.
Siemens 6GK5307-3BL00-2AA3 combines copper access ports and multimode fiber uplinks in one managed switch.
Traffic on 6GK5307-3BL00-2AA3 is segmented and monitored through its management and diagnostic functions.
Power, signaling, and removable configuration connections support cabinet integration of 6GK5307-3BL00-2AA3.
The Siemens 6GK5307-3BL00-2AA3 SCALANCE X307-3 Managed Industrial Ethernet Switch may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK5307-3BL00-2AA3 SCALANCE X307-3 Managed Industrial Ethernet Switch Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Copper and Fiber Connections
- RJ45 access: Seven ports connect 10/100 Mbit/s network components or terminal equipment.
- SC uplinks: Three multimode SC ports carry 1000 Mbit/s optical Ethernet.
- Common fabric: Copper and fiber frames pass through the same managed switching functions.
- Port diagnostics: Status, error, packet-size, and packet-type counters isolate link and traffic faults.
Traffic Separation
- VLAN capacity: Up to 255 VLANs can separate broadcast domains by managed port assignment.
- Dynamic membership: Supported VLAN and multicast protocols update forwarding membership from network signaling.
- IGMP: Snooping or querier functions constrain multicast delivery to the required ports.
- Rate control: Broadcast, multicast, and unicast limiting protects the switch fabric from excessive traffic.
Network Recovery Methods
- MRP: The switch can operate with the supported media redundancy role in a ring.
- HRP: High-speed ring and standby modes provide an alternate recovery method.
- Spanning tree: STP, RSTP, and MSTP prevent loops in suitable bridged topologies.
- Protocol match: All devices in the redundancy domain must use compatible roles and timing parameters.
Configuration and Diagnostics
- Local access: The select/set control and LEDs provide basic local status and fault handling.
- Remote access: CLI, web management, SNMP, SysLog, and PROFINET diagnostics expose separate configuration and monitoring paths.
- C-PLUG: Removable media stores the assigned device configuration apart from the fixed switch electronics.
- Security: HTTPS, SSH, and IEEE 802.1X support protected management and authenticated network access when configured.