Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 6EP1336-3BA00

All in stock · Add one and it is quoted together with the model, one shipping cost.

6EP1336-3BA00

Siemens 6EP1336-3BA00 is a SITOP modular stabilized power supply with 120/230 VAC input and 24 VDC, 20 A output. It provides a regulated 480 W control supply for PLC, I/O and cabinet loads.

Ships by Wednesday, November 25 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 6EP1336-3BA00

6EP1336-3BA00Siemens Stabilized Power Supply
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Siemens
Part Number
6EP1336-3BA00
Product Family
Siemens SITOP
Product Type
Stabilized Power Supply
Weight
4.85 lbs (2.2 kg)
Estimated shipping dimensions
15 × 20 × 14 cm
Tariff Code
85044083
Country of origin
Romania
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • Delivers a stabilized 24 VDC, 20 A output for industrial control loads.
  • Accepts selectable 120 or 230 VAC single-phase input through the documented jumper arrangement.
  • Buffers short mains interruptions while providing electronic fault protection.
The current ordering configuration is the phase-out SITOP modular MLFB with selectable 120/230 VAC input and a regulated 480 W output.

It supplies the 24 VDC rail used by PLCs, distributed I/O, relays, sensors and other control-cabinet equipment.

Selection must verify the input jumper, load demand, upstream protection, enclosure width, ventilation clearances and successor differences.

Availability is subject to Apter Power's current inventory and sourcing confirmation.
Verified resources for Siemens 6EP1336-3BA00: Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Siemens 6EP1336-3BA00 SITOP Power Supply Specs

General

  • ManufacturerSiemens
  • Model6EP1336-3BA00
  • ConditionNew Original ready stock
  • Product FamilySITOP modular
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
  • The regulated 480 W output maintains 24 VDC control power with 0.1% static line regulation and 0.1% static load regulation.
  • Manufacturer data specifies 89% efficiency and a typical internal power loss of 59 W at rated operating conditions.
  • At 230 VAC input, the supply buffers at least 20 ms of mains interruption while delivering rated output current.
  • The DC output is short-circuit proof and uses electronic control to limit sustained fault energy on the control-power rail.
  • A green status LED provides local confirmation that the regulated output is present during normal operation.
  • Feeder protection and downstream selectivity must be coordinated so one branch fault does not unnecessarily interrupt all control loads.
  • The device wire jumper must be set for the actual 120 or 230 VAC source before the incoming supply is energized.
  • The regulated output can be adjusted from 24 to 28.8 VDC to suit the documented control-voltage requirement.
  • Load current, conductor size, feeder protection and 50 mm top-and-bottom clearances must be checked as one cabinet design.

Description

6EP1336-3BA00 is a Siemens SITOP modular stabilized power supply for single-phase 120 or 230 VAC input selected by a device wire jumper. It delivers a regulated 24 VDC, 20 A output rated 480 W.

The unit supplies PLCs, distributed I/O, relays, sensors and other 24 VDC control loads while buffering brief mains interruptions and limiting fault conditions through its electronic protection design.

Before ordering or replacing the unit, confirm the complete MLFB, jumper position, load current, feeder protection, conductor size, DIN-rail space and thermal clearances. Siemens lists 6EP1336-3BA10 as the successor, not as an unchecked drop-in substitute.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

May
UAEGE IS200VVIBH1C

Evidence Before Delivery

A Dubai power-project customer visited Apter Power in Xiamen to inspect GE turbine-control cards, labels, packaging and visible condition before delivery.

On siteCustomer inspection in Xiamen
Pre-deliveryIdentity & condition reviewed
“ Seeing the products, labels and inspection process in person gave us a clearer understanding of Apter Power's quality control. — Muhammad ”
May · UAE · October 2026
Read the full case study
Yuki
USA11 Emerson DeltaV models

11 Emerson DeltaV Models Secured and Inspected for an American Natural Gas Project

See how Apter Power secured 11 new and unused Emerson DeltaV models, supported independent powered inspection and delivered the order for an American natural gas project.

11DeltaV models secured
6 daysFull order prepared
“ Apter secured all our DeltaV models and supported independent inspection before we paid the balance. — Mohanad ”
Yuki · USA · May 2026
Read the full case study
Leonia
IndonesiaBently Nevada 3500/22M 288055-01

On-Site Verification for an Indonesian Power Plant

After a previous suspected-counterfeit purchase, an Indonesian power-plant customer used a 50/50 payment plan, visited Apter Power to inspect two Bently Nevada 3500/22M 288055-01 modules, requested COO documentation and approved next-day hotel delivery.

100%Modules inspected on site
50/50Deposit / balance after inspection
“ They are very professional and supply quality products. I have purchased Bently Nevada products from them and had a very good experience. — Tri ”
Leonia · Indonesia · May 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

How is the 6EP1336-3BA00 input configuration selected correctly?

Set the device wire jumper for the actual 120 or 230 VAC supply and verify the permitted input range before energizing the unit.

Which control-cabinet loads are compatible with 6EP1336-3BA00?

It can supply 24 VDC loads whose combined steady-state and startup demand remains within the output capability and coordinated protection design.

What application problem does 6EP1336-3BA00 address?

It provides a regulated high-current 24 VDC rail and bridges brief mains interruptions for industrial automation equipment.

What is Siemens' lifecycle status for 6EP1336-3BA00?

Siemens lists the article as PM400 phase-out and records discontinuation on 1 October 2014; Apter Power confirms legacy availability separately.

Is 6EP1336-3BA10 a direct replacement for 6EP1336-3BA00?

Siemens identifies 6EP1336-3BA10 as the successor, but input options, dimensions, terminals, protection and cabinet integration must be compared before substitution.

How should a 6EP1336-3BA00 manual or quotation request be prepared?

Send the complete MLFB, quantity, destination, input voltage, total 24 VDC load and installation constraints so the correct datasheet and offer can be supplied.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

6EP1337-3BA00
The Siemens 6EP1337-3BA00 is a SITOP PSU100M stabilized power supply module that converts 120/230 V AC input into an adjustable 24 to 28.8 V DC output for high-current industrial control equipment.
In stock
6EP1436-3BA00
The SIEMENS 6EP1436-3BA00 is a 3-phase stabilized power supply from the premier SITOP modular product line, designed to meet the rigorous demands of complex industrial environments.
In stock
6EP1332-1SH71
SIMATIC PM1207 stabilized power supply with 120/230 V AC input and 24 V DC, 2.5 A output.
In stock
6EP1333-2AA01
6EP1333-2AA01 converts 120/230 V AC input to a regulated 24 V DC, 5 A supply for industrial control loads.
In stock
6EP1322-1SH03
Siemens 6EP1322-1SH03 is a LOGO!Power stabilized supply that accepts wide-range AC or DC input and delivers an adjustable 12 V DC output rated at 4.5 A.
In stock
6EP1334-3BA10
Siemens 6EP1334-3BA10 is a SITOP PSU200M power supply with selectable 120–230 V or 230–500 V AC input and an adjustable 24 V DC, 10 A output.
In stock
6EP1437-3BA10
Siemens 6EP1437-3BA10 is a SITOP PSU8200 stabilized power supply that converts a three-phase 400–500 V AC input into a regulated 24 V DC, 40 A output.
In stock
6EP3437-8SB00-0AY0
Siemens 6EP3437-8SB00-0AY0 is a SITOP PSU8200 stabilized power supply that converts a three-phase 400–500 V AC input to 24 V DC at 40 A.
In stock
6EP3333-3SA00-0AY0
Siemens 6EP3333-3SA00-0AY0 is a SITOP PSU2200 power supply that converts single-phase AC input into regulated 24 V DC at 5 A.
In stock
6EP3332-3SA00-0AY0
Siemens 6EP3332-3SA00-0AY0 is a SITOP PSU2200 stabilized power supply that converts single-phase AC input into regulated 24 V DC for industrial control loads.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat