Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 6EP1437-3BA10

All in stock · Add one and it is quoted together with the model, one shipping cost.

6EP1437-3BA10

Siemens 6EP1437-3BA10 is a SITOP PSU8200 stabilized power supply that converts a three-phase 400–500 V AC input into a regulated 24 V DC, 40 A output.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 6EP1437-3BA10

6EP1437-3BA10Siemens SITOP PSU8200 24 V DC 40 A Stabilized Power Supply
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Siemens
Part Number
6EP1437-3BA10
Product Family
Siemens SITOP
Product Type
SITOP PSU8200 24 V DC 40 A Stabilized Power Supply
Stock
1
Weight
7.496 lbs (3.4 kg)
Estimated shipping dimensions
18.5x18.5x15cm
Tariff Code
85044083
Country of origin
Romania
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • A three-phase wide-range input feeds an isolated, adjustable 24 V DC output.
  • Selectable overload behavior separates short load peaks from sustained fault handling.
  • DIN-rail mounting, natural convection, LEDs, and a relay contact define the installation interface.
Siemens 6EP1437-3BA10 converts a three-phase AC supply into a regulated 40 A DC rail.

The output terminals and protection logic of 6EP1437-3BA10 distribute load current while monitoring overload conditions.

Status indicators and the relay contact on 6EP1437-3BA10 provide local and external supply-state information.

The Siemens 6EP1437-3BA10 SITOP PSU8200 24 V DC 40 A Stabilized Power Supply may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6EP1437-3BA10 SITOP PSU8200 24 V DC 40 A Stabilized Power Supply Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Three-Phase Input Path

  • Line connection: L1, L2, L3, and protective earth terminate separately at the supply input.
  • Wide range: The input stage accepts the documented voltage and frequency ranges without a manual range switch.
  • Buffering: Stored energy maintains the rated output through the specified short mains interruption.
  • Protection: External three-pole circuit protection is selected for the documented incoming-current behavior.

Regulated DC Distribution

  • Voltage setting: The front potentiometer adjusts the regulated output inside the stated range.
  • Load terminals: Two positive and two negative terminals divide the high-current field wiring.
  • Parallel use: Two matched units can share load only after their characteristics and voltage settings are aligned.
  • Status path: The green indicator and relay contact show when the 24 V output remains valid.

Overload and Short-Circuit Response

  • Load peaks: The supply delivers a short high-current pulse for demanding startup loads.
  • Current limit: A sustained overload is held near the specified limiting current.
  • Selectable mode: The characteristic can be changed between constant-current behavior and latched shutdown.
  • Recovery: Fault removal and the selected mode determine whether the output resumes automatically.

Rail, Clearance, and Wiring Boundaries

  • Rail: The housing snaps onto a 35 x 15 mm DIN rail.
  • Airflow: Natural convection requires unobstructed clearance above and below the enclosure.
  • Temperature: Output derating applies in the upper part of the operating-temperature range.
  • Segregation: Input, DC output, protective earth, and signaling conductors remain on their assigned terminals.

Description

Siemens 6EP1437-3BA10 is a SITOP PSU8200 stabilized power supply that converts a three-phase 400–500 V AC source into an isolated 24 V DC rail for industrial control loads. Its wide input range feeds a regulated output whose voltage can be adjusted when the connected equipment requires a level above the nominal setting.

At the output of 6EP1437-3BA10, two positive and two negative terminals divide the 40 A load connection while a green indicator and a relay contact report the 24 V OK state. The selectable overload characteristic either holds a constant current near the limitation level or latches the output off after a fault.

Short load transients are supplied by the overload reserve of 6EP1437-3BA10, whereas sustained overcurrent moves the unit into its configured protection response. Two units can be paralleled for higher output capacity only when their characteristic and output settings are coordinated.

The enclosure of 6EP1437-3BA10 snaps onto a 35 x 15 mm DIN rail and relies on natural convection through the specified top and bottom clearances. Separate screw terminals keep the three-phase input, protective earth, DC output, and signaling contact on defined wiring paths.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

May
Malaysia3500/22M

Malaysia Customer Collects Bently Nevada 3500/22-01-02-00 After On-Site Inspection

After equipment downtime, a Malaysian customer travelled to Xiamen to inspect and collect a Bently Nevada 3500/22-01-02-00. The unit could be tested and put into use the next day, helping shorten factory downtime and reduce associated losses.

5On-site checks
1 dayReady for testing
“ Apter responded quickly and had the right Bently Nevada module ready for us to inspect and collect. — Shah ”
May · Malaysia · October 2026
Read the full case study
Jim
ChinaSGS inspection

SGS Verification for Global Automation Procurement

Documented third-party inspection helps procurement teams evaluate supplier processes, product conformity and pre-shipment evidence before cross-border automation orders move forward.

SGS ReviewIndependent evidence
4 StepsClear verification process
“ Verification should show what was checked and how it matches the buyer’s requirements. — Jim ”
Jim · China · 2026
Read the full case study
Leonia
Xiamen, ChinaAutomation spares

Bureau Veritas Audit Strengthens Trust for Global Buyers

A Bureau Veritas review checked Apter Power's business licence, registered address, office and selected export records, helping overseas buyers verify the company behind a quotation before ordering.

VerifiedBusiness identity checked
BV AuditCompany records reviewed
“ Trust starts with company details and trading records that buyers can verify. — Apter Power Team ”
Leonia · Xiamen, China · 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

Why does 6EP1437-3BA10 show 24 V OK but a connected load still resets?

Measure 6EP1437-3BA10 at the load during startup, then check cable drop, terminal torque, peak current, output setting, and shared return paths.

What causes 6EP1437-3BA10 to enter latched shutdown instead of limiting current?

Check the selected 6EP1437-3BA10 overload characteristic, sustained load, short circuit, parallel-unit settings, and whether reset conditions have been met.

How should two 6EP1437-3BA10 units be prepared for parallel operation?

Match both 6EP1437-3BA10 output voltages and characteristics, use balanced conductors, verify common returns, and remain within the permitted two-unit arrangement.

Why does 6EP1437-3BA10 overheat even when output current is below 40 A?

Inspect 6EP1437-3BA10 ambient temperature, top and bottom clearance, adjacent heat sources, airflow, input voltage, and actual continuous load.

What should be checked when the relay contact of 6EP1437-3BA10 changes state?

Verify 6EP1437-3BA10 output voltage, overload LEDs, load current, input phases, external contact wiring, and the contact circuit rating.

Can 6EP1437-3BA10 supply 28.8 V DC at the full 40 A rating?

The 6EP1437-3BA10 adjustment can reach 28.8 V, but the documented maximum output power limits the available current at elevated voltage.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

6EP3134-0TA00-0AY0
Siemens 6EP3134-0TA00-0AY0 is a SITOP PSU3400 stabilized power supply that converts a 14–32 VDC source to an adjustable 24 VDC, 10 A output.
In stock
6EP1337-3BA00
The Siemens 6EP1337-3BA00 is a SITOP PSU100M stabilized power supply module that converts 120/230 V AC input into an adjustable 24 to 28.8 V DC output for high-current industrial control equipment.
In stock
6EP3331-6SB00-0AY0
Siemens 6EP3331-6SB00-0AY0 is a stabilized LOGO!POWER supply with 100-240 V AC input and 24 V DC, 1.3 A output.
In stock
6EP3332-6SB00-0AY0
Siemens 6EP3332-6SB00-0AY0 is a stabilized LOGO!POWER supply with 100-240 V AC input and 24 V DC, 2.5 A output.
In stock
6EP1333-2AA01
6EP1333-2AA01 converts 120/230 V AC input to a regulated 24 V DC, 5 A supply for industrial control loads.
In stock
6EP1332-1LD00
Converting a single-phase 100–240 V AC source into regulated control power, Siemens 6EP1332-1LD00 is a SITOP PSU100D supply rated for 24 V DC at 3.1 A.
In stock
6EP1334-3BA10
Siemens 6EP1334-3BA10 is a SITOP PSU200M power supply with selectable 120–230 V or 230–500 V AC input and an adjustable 24 V DC, 10 A output.
In stock
6EP3310-6SB00-0AY0
Siemens 6EP3310-6SB00-0AY0 is a LOGO!Power stabilized supply with 100–240 V AC or 110–300 V DC input and 5 V DC/3 A output.
In stock
6EP1332-4BA00
Siemens 6EP1332-4BA00 is a SIMATIC PM 1507 load power supply that provides regulated 24 V DC to S7-1500 CPUs and connected control-system loads.
In stock
6EP1332-5BA10
Siemens 6EP1332-5BA10 is a SITOP PSU100C power supply that converts single-phase AC or DC input into an adjustable, regulated 24 V DC output for automation loads up to 4 A.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat