Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 6EP3437-8SB00-0AY0

  • 6EP1961-3BA21 SITOP PSE202U Redundancy Module
  • 6EP1436-3BA00 3-phase stabilized power supply
  • 6EP1333-2AA01 SITOP smart 120 W Regulated Power Supply

All in stock · Add one and it is quoted together with the model, one shipping cost.

6EP3437-8SB00-0AY0

Siemens 6EP3437-8SB00-0AY0 is a SITOP PSU8200 stabilized power supply that converts a three-phase 400–500 V AC input to 24 V DC at 40 A.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 6EP3437-8SB00-0AY0

6EP3437-8SB00-0AY0Siemens SITOP PSU8200 3-Phase 24 V DC 40 A Power Supply
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Siemens
Part Number
6EP3437-8SB00-0AY0
Product Family
Siemens SITOP
Product Type
SITOP PSU8200 3-Phase 24 V DC 40 A Power Supply
Stock
1
Weight
7.275 lbs (3.3 kg)
Estimated shipping dimensions
22x22.5x18.5cm
Tariff Code
8504401990
Country of origin
Romania
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • A three-phase 400–500 V AC input feeds one stabilized 24 V DC output.
  • The 40 A output can be adjusted from 24 to 28 V DC for the connected control load.
  • Overload protection and a separate 24 V OK relay separate power delivery from status reporting.
Siemens 6EP3437-8SB00-0AY0 converts the incoming three-phase supply into a regulated control-voltage rail.

The output terminals of 6EP3437-8SB00-0AY0 carry the load current while the relay contact reports output availability to another circuit.

DIN-rail mounting places the input, output, and status wiring inside the protected control enclosure.

The Siemens 6EP3437-8SB00-0AY0 SITOP PSU8200 Power Supply may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6EP3437-8SB00-0AY0 SITOP PSU8200 Power Supply Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Three-Phase Supply Path

  • Rated range: The input is specified for 400 to 500 V AC three-phase operation.
  • Permissible range: The supply path remains within the documented 320 to 575 V AC limits.
  • Frequency: The incoming network must remain between 45 and 65 Hz.
  • Protection: Upstream branch protection must follow the documented supply requirements.

Regulated Load Supply

  • Rated output: The terminals provide 24 V DC at 40 A.
  • Adjustment: The output setting covers 24 to 28 V DC.
  • Regulation: The electronics stabilize the selected voltage as the connected load changes.
  • Ripple: Residual ripple remains within the documented 100 mV maximum.

Fault and Status Separation

  • Overload: Current limiting protects the output path during excessive load.
  • Short circuit: The DC output is short-circuit proof within the specified behavior.
  • Status relay: The normally open contact reports the 24 V OK condition independently.
  • Efficiency: Rated conversion reaches the documented 94% typical efficiency.

Cabinet Installation

  • Rail: The unit mounts on a 35 mm DIN rail.
  • Terminals: Screw terminals keep the AC input, DC output, and relay circuits distinct.
  • Enclosure: IP20 construction requires a protected cabinet.
  • Climate: The installed unit must remain within -25 to +70 °C.

Description

Siemens 6EP3437-8SB00-0AY0 is a SITOP PSU8200 three-phase power supply that converts a 400–500 V AC plant supply into a stabilized 24 V DC output for control equipment. Its 40 A rated output supplies as much as 960 W through the output terminals.

The regulated output of 6EP3437-8SB00-0AY0 can be adjusted from 24 to 28 V DC. Output stabilization keeps the connected load on the selected DC level while the specified ripple remains within 100 mV.

During overload or short-circuit conditions, 6EP3437-8SB00-0AY0 limits and protects the output rather than passing the input fault into the DC load path. A separate normally open relay reports the 24 V OK state to the control circuit.

Mounted on a 35 mm DIN rail, 6EP3437-8SB00-0AY0 accepts its three input phases and distributes the DC output through screw terminals. The enclosure must keep the IP20 device within its -25 to +70 °C operating range and leave clearance for wiring and heat dissipation.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

May
UAEGE IS200VVIBH1C

Evidence Before Delivery

A Dubai power-project customer visited Apter Power in Xiamen to inspect GE turbine-control cards, labels, packaging and visible condition before delivery.

On siteCustomer inspection in Xiamen
Pre-deliveryIdentity & condition reviewed
“ Seeing the products, labels and inspection process in person gave us a clearer understanding of Apter Power's quality control. — Muhammad ”
May · UAE · October 2026
Read the full case study
Jim
Xiamen, ChinaBently Nevada

A Practical Bently Nevada 3500 Plan to Cut Factory Downtime

A practical factory deployment plan connecting 3300 XL proximity probes, a Bently Nevada 3500 rack, DCS/PLC systems and System 1 software to detect rotating-equipment risks earlier and support predictive maintenance.

3 LayersSensors to diagnostics
4 StepsPlanning to maintenance
“ A 3500 project starts with understanding machinery risks and maintenance needs. — Jim ”
Jim · Xiamen, China · 2026
Read the full case study
Leonia
IndonesiaBently Nevada 3500/22M 288055-01

On-Site Verification for an Indonesian Power Plant

After a previous suspected-counterfeit purchase, an Indonesian power-plant customer used a 50/50 payment plan, visited Apter Power to inspect two Bently Nevada 3500/22M 288055-01 modules, requested COO documentation and approved next-day hotel delivery.

100%Modules inspected on site
50/50Deposit / balance after inspection
“ They are very professional and supply quality products. I have purchased Bently Nevada products from them and had a very good experience. — Tri ”
Leonia · Indonesia · May 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

Why does 6EP3437-8SB00-0AY0 show no 24 V DC output after wiring?

Check all three 6EP3437-8SB00-0AY0 input phases, upstream protection, terminal torque, input voltage, and output short circuit.

How should the output voltage of 6EP3437-8SB00-0AY0 be set?

Measure the 6EP3437-8SB00-0AY0 output at the load terminals and adjust it only within the documented 24 to 28 V DC range.

What does an open status contact mean on 6EP3437-8SB00-0AY0?

Verify the 6EP3437-8SB00-0AY0 DC output, input supply, overload state, relay wiring, and contact rating before treating the signal as valid.

Why does 6EP3437-8SB00-0AY0 reduce voltage under load?

Compare the 6EP3437-8SB00-0AY0 load current with 40 A and inspect cable drop, terminal resistance, overload, and output adjustment.

Can 6EP3437-8SB00-0AY0 operate from a single-phase input?

No. 6EP3437-8SB00-0AY0 is specified for a three-phase AC supply within its documented voltage range.

What cabinet conditions are required for 6EP3437-8SB00-0AY0?

Keep 6EP3437-8SB00-0AY0 on its DIN rail inside an enclosure that maintains IP20 protection, wiring clearance, and -25 to +70 °C operation.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

6EP1961-3BA21
Siemens 6EP1961-3BA21 is a SITOP PSE202U redundancy module that decouples two 24 V DC supplies and carries up to 40 A total.
In stock
6EP1436-3BA00
The SIEMENS 6EP1436-3BA00 is a 3-phase stabilized power supply from the premier SITOP modular product line, designed to meet the rigorous demands of complex industrial environments.
In stock
6EP1333-2AA01
6EP1333-2AA01 converts 120/230 V AC input to a regulated 24 V DC, 5 A supply for industrial control loads.
In stock
6EP1333-3BA00
Siemens 6EP1333-3BA00 is a SITOP PSU200M 24 V DC, 5 A stabilized power supply for one- or two-phase AC input.
In stock
6EP1332-1LD00
Converting a single-phase 100–240 V AC source into regulated control power, Siemens 6EP1332-1LD00 is a SITOP PSU100D supply rated for 24 V DC at 3.1 A.
In stock
6EP1334-3BA10
Siemens 6EP1334-3BA10 is a SITOP PSU200M power supply with selectable 120–230 V or 230–500 V AC input and an adjustable 24 V DC, 10 A output.
In stock
6EP3334-8SB00-0AY0
Siemens 6EP3334-8SB00-0AY0 is a SITOP PSU8200 stabilized power supply accepting single-phase 120/230 V AC and delivering 24 V DC at 10 A. It supplies regulated control power in industrial cabinets.
In stock
6EP1437-3BA10
Siemens 6EP1437-3BA10 is a SITOP PSU8200 stabilized power supply that converts a three-phase 400–500 V AC input into a regulated 24 V DC, 40 A output.
In stock
6EP3333-3SA00-0AY0
Siemens 6EP3333-3SA00-0AY0 is a SITOP PSU2200 power supply that converts single-phase AC input into regulated 24 V DC at 5 A.
In stock
6EP1332-4BA00
Siemens 6EP1332-4BA00 is a SIMATIC PM 1507 load power supply that provides regulated 24 V DC to S7-1500 CPUs and connected control-system loads.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat