Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 6EP3310-6SB00-0AY0

All in stock · Add one and it is quoted together with the model, one shipping cost.

6EP3310-6SB00-0AY0

Siemens 6EP3310-6SB00-0AY0 is a LOGO!Power stabilized supply with 100–240 V AC or 110–300 V DC input and 5 V DC/3 A output.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 6EP3310-6SB00-0AY0

6EP3310-6SB00-0AY0Siemens LOGO!Power 5 V DC/3 A Stabilized Power Supply
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Siemens
Part Number
6EP3310-6SB00-0AY0
Product Family
Siemens SITOP
Product Type
LOGO!Power 5 V DC/3 A Stabilized Power Supply
Stock
1
Weight
0.265 lbs (0.12 kg)
Estimated shipping dimensions
12.4x9.3x6.3cm
Tariff Code
8504409999
Country of origin
Germany
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • A wide-range AC/DC input feeds an isolated 5 V DC regulator.
  • The adjustable output supplies up to 3 A with constant-current protection.
  • DIN-rail or wall mounting preserves the documented convection path.
6EP3310-6SB00-0AY0 separates the input network from an SELV control-power output.

The front potentiometer trims the regulated voltage without changing the 3 A current rating.

Buffering, short-circuit limiting, and the green output lamp expose different operating conditions.

The complete order number and documented configuration of Siemens 6EP3310-6SB00-0AY0 LOGO!Power Supply should be checked against the installed equipment.
Siemens 6EP3310-6SB00-0AY0 LOGO!Power Supply Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Wide-Range Mains Interface

  • AC source: The supply accepts 85 to 264 V AC.
  • DC source: The input also accepts 110 to 300 V DC.
  • Frequency: AC operation covers 47 to 63 Hz.
  • Buffering: A documented 40 ms interval bridges a short mains loss.

Regulated Five-Volt Path

  • Rated output: The isolated output supplies 5 V DC at 3 A.
  • Adjustment: The front control spans 4.6 to 5.4 V.
  • Status: A green lamp indicates valid output voltage.
  • Parallel use: Two units may be paralleled under the documented conditions.

Fault and Isolation Behavior

  • Short circuit: The supply follows a constant-current characteristic.
  • Current level: Short-circuit current is approximately 3.8 A.
  • Isolation: The output is separated as SELV / ES1.
  • Enclosure: IP20 protection requires installation inside a suitable cabinet.

Cooling and Cabinet Clearance

  • Rail fit: The housing snaps onto a 35 mm DIN rail.
  • Wall fit: Direct wall mounting is also documented.
  • Clearance: Twenty millimetres is reserved above and below.
  • Derating: Available output falls by 2%/K above 55 °C.

Description

Siemens 6EP3310-6SB00-0AY0 converts a single-phase AC or DC source into an isolated 5 V DC supply. Its regulated output feeds low-voltage control electronics while the internal power stage separates the input network from the SELV output.

The wide-range input of 6EP3310-6SB00-0AY0 accepts 100–240 V AC or 110–300 V DC. A 40 ms buffering interval at the documented input condition keeps the 3 A output energized across a short mains interruption.

Output voltage on 6EP3310-6SB00-0AY0 can be adjusted from 4.6 to 5.4 V through the front potentiometer. Constant-current short-circuit behavior limits the protected output, and the green indicator confirms that regulated voltage is present.

The 36 mm housing of 6EP3310-6SB00-0AY0 snaps onto a 35 mm DIN rail or mounts directly to a wall. Natural convection requires the documented top and bottom clearances, and output current derates above 55 °C.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

Jim
Xiamen, ChinaBently Nevada

A Practical Bently Nevada 3500 Plan to Cut Factory Downtime

A practical factory deployment plan connecting 3300 XL proximity probes, a Bently Nevada 3500 rack, DCS/PLC systems and System 1 software to detect rotating-equipment risks earlier and support predictive maintenance.

3 LayersSensors to diagnostics
4 StepsPlanning to maintenance
“ A 3500 project starts with understanding machinery risks and maintenance needs. — Jim ”
Jim · Xiamen, China · 2026
Read the full case study
May
UAEGE IS200VVIBH1C

Evidence Before Delivery

A Dubai power-project customer visited Apter Power in Xiamen to inspect GE turbine-control cards, labels, packaging and visible condition before delivery.

On siteCustomer inspection in Xiamen
Pre-deliveryIdentity & condition reviewed
“ Seeing the products, labels and inspection process in person gave us a clearer understanding of Apter Power's quality control. — Muhammad ”
May · UAE · October 2026
Read the full case study
Leonia
IndonesiaBently Nevada 3500/22M 288055-01

On-Site Verification for an Indonesian Power Plant

After a previous suspected-counterfeit purchase, an Indonesian power-plant customer used a 50/50 payment plan, visited Apter Power to inspect two Bently Nevada 3500/22M 288055-01 modules, requested COO documentation and approved next-day hotel delivery.

100%Modules inspected on site
50/50Deposit / balance after inspection
“ They are very professional and supply quality products. I have purchased Bently Nevada products from them and had a very good experience. — Tri ”
Leonia · Indonesia · May 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

Why does Siemens 6EP3310-6SB00-0AY0 output fall below 5 V?

Check Siemens 6EP3310-6SB00-0AY0 adjustment, load current, input voltage, wiring drop, short-circuit limiting, and ambient derating.

Can Siemens 6EP3310-6SB00-0AY0 run from a DC source?

Yes. Siemens 6EP3310-6SB00-0AY0 accepts 110 to 300 V DC at its input under the documented conditions.

Why does Siemens 6EP3310-6SB00-0AY0 overheat in a cabinet?

Inspect Siemens 6EP3310-6SB00-0AY0 top and bottom clearance, ambient temperature, load, mounting orientation, and neighboring heat sources.

How should Siemens 6EP3310-6SB00-0AY0 be protected upstream?

Select the Siemens 6EP3310-6SB00-0AY0 feeder breaker from the documented characteristic and rating while considering inrush current.

What does the green LED on Siemens 6EP3310-6SB00-0AY0 indicate?

The Siemens 6EP3310-6SB00-0AY0 green lamp confirms that regulated output voltage is present, not that every load branch is healthy.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

6EP1337-3BA00
The Siemens 6EP1337-3BA00 is a SITOP PSU100M stabilized power supply module that converts 120/230 V AC input into an adjustable 24 to 28.8 V DC output for high-current industrial control equipment.
In stock
6EP1436-3BA00
The SIEMENS 6EP1436-3BA00 is a 3-phase stabilized power supply from the premier SITOP modular product line, designed to meet the rigorous demands of complex industrial environments.
In stock
6EP3331-6SB00-0AY0
Siemens 6EP3331-6SB00-0AY0 is a stabilized LOGO!POWER supply with 100-240 V AC input and 24 V DC, 1.3 A output.
In stock
6EP1333-2AA01
6EP1333-2AA01 converts 120/230 V AC input to a regulated 24 V DC, 5 A supply for industrial control loads.
In stock
6EP1334-2BA20
The Siemens 6EP1334-2BA20 is a SITOP PSU100S single-phase stabilized power supply with a 24 V DC, 10 A rated output.
In stock
6EP1333-1LB00
Siemens 6EP1333-1LB00 is a single-phase SITOP PSU100L power supply. It is designed for basic industrial control and automation power distribution with DIN-rail mounting.
In stock
6EP1434-2BA20
Siemens 6EP1434-2BA20 is a three-phase SITOP PSU300S that converts 400–500 V AC to a regulated 24 V DC, 10 A supply. Its 240 W output supports cabinet-level automation power distribution.
In stock
6EP1961-2BA21
Siemens 6EP1961-2BA21 is a four-channel SITOP PSE200U selectivity module that divides a 24 V DC, 40 A source into individually monitored and adjustable 10 A load circuits.
In stock
6EP3333-3SA00-0AY0
Siemens 6EP3333-3SA00-0AY0 is a SITOP PSU2200 power supply that converts single-phase AC input into regulated 24 V DC at 5 A.
In stock
6EP1332-5BA10
Siemens 6EP1332-5BA10 is a SITOP PSU100C power supply that converts single-phase AC or DC input into an adjustable, regulated 24 V DC output for automation loads up to 4 A.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat