Features:
- Wide-range input: Rated 100-240 V AC input and 110-300 V DC input
- Controlled output: Adjustable 22.2-26.4 V DC with 1.3 A rated current
- Protection design: Short-circuit proof with a constant-current characteristic
The
Siemens 6EP3331-6SB00-0AY0 is the compact 1.3 A member of the LOGO!POWER 24 V DC supply range.
The unit provides 40 ms minimum mains buffering at Vin = 187 V and indicates normal output operation with a green LED.
Procurement review should confirm the load current, adjustable output range, terminal conductors, and available 36 mm panel width.
Availability is subject to Apter Power's current inventory and sourcing confirmation.
Verified resources for Siemens 6EP3331-6SB00-0AY0:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Siemens 6EP3331-6SB00-0AY0 LOGO!POWER 24 V DC 1.3 A Power Supply Specs
General
- ManufacturerSiemens
- Model6EP3331-6SB00-0AY0
- ConditionNew and factory sealed
- Product FamilyLOGO!POWER
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Network type: Siemens specifies operation from a one-phase AC or DC supply network.
- AC range: Confirm a rated input between 100 and 240 V AC.
- DC range: The documented DC input range is 110 to 300 V.
- Protection planning: Coordinate the feeder protection with the Siemens miniature-circuit-breaker recommendation.
- Rated output: The controlled isolated output is rated 24 V DC at 1.3 A.
- Adjustment: The output can be set from 22.2 to 26.4 V by potentiometer.
- Overload behavior: Siemens specifies 150 percent rated-current overload capability for 200 ms.
- Parallel operation: Two units may be connected in parallel to increase power.
- Rail mounting: The unit snaps onto a 35 x 7.5/15 mm DIN rail.
- Clearance: Maintain 20 mm above and below the unit.
- Temperature: Natural-convection operation is specified from -25 to 70 degrees C with derating above 55 degrees C.
- Footprint: Plan for a 36 x 90 x 53 mm enclosure and 36 mm installation width.