Features:
- 2.5 A output: Controlled 24 V DC output with an adjustable voltage range
- Dual input type: One-phase AC or DC supply-network operation
- Protected operation: Short-circuit proof constant-current design
The
Siemens 6EP3332-6SB00-0AY0 is the 2.5 A LOGO!POWER supply for applications requiring more output current than the narrower family variant.
Siemens specifies 89.5 percent efficiency, 40 ms minimum buffering at Vin = 187 V, and a green LED for output-voltage status.
Procurement review should confirm feeder protection, load demand, output adjustment, thermal derating, and 54 mm panel width.
Availability is subject to Apter Power's current inventory and sourcing confirmation.
Verified resources for Siemens 6EP3332-6SB00-0AY0:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Siemens 6EP3332-6SB00-0AY0 LOGO!POWER 24 V DC 2.5 A Power Supply Specs
General
- ManufacturerSiemens
- Model6EP3332-6SB00-0AY0
- ConditionNew and factory sealed
- Product FamilyLOGO!POWER
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Supply network: Siemens specifies one-phase AC or DC input operation.
- AC rating: Use a rated supply within 100 to 240 V AC.
- DC range: The documented direct-current input range is 110 to 300 V.
- Feeder selection: Review the official miniature-circuit-breaker recommendation for the higher inrush current.
- Rated current: The output is rated 2.5 A at 24 V DC.
- Voltage setting: Output adjustment is available from 22.2 to 26.4 V.
- Short circuit: A constant-current characteristic provides short-circuit protection.
- Thermal range: Apply the specified 2 percent per kelvin derating above 55 degrees C.
- Mounting: DIN-rail and wall mounting are officially supported.
- Clearance: Provide 20 mm free space above and below the supply.
- Terminals: Input and output use screw-terminal connections for the documented conductor sizes.
- Dimensions: Reserve a 54 x 90 x 53 mm device footprint and 54 mm installation width.