• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      sales1@apterpower.com
      +86 181 0690 9650
      Request a

      Fast Quote

      Manufacturers
      ALL MANUFACTURERS
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        Manufacturers
        sales1@apterpower.com +86 181 0690 9650
        Choose a manufacturer
        ALL MANUFACTURERS
        Ask our team:
        • Phone: +86 181 0690 9650
        • E-Mail sales1@apterpower.com

        • Lifecycle status

          Active / Available from OEM
          Apter Power provides 6ES7132-7GD00-0AB0 quotations, manuals, output-module selection, and exact-model matching.

        6ES7132-7GD00-0AB0

        / 4.9
        1001 reviews ｜ Need a Specific Revision?
        Within a SIMATIC ET 200iSP station, Siemens 6ES7132-7GD00-0AB0 is a four-channel intrinsically safe digital output module that drives Ex i field actuators and accepts an L-shutdown input.
        In Stock
        Ships by Wednesday, October 28
        Fast Shipping Available
        Get a quick price for 6ES7132-7GD00-0AB0
        Quantity
        *E-mail
        Company
        *Mobile
        *Content
        Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
        Get a Quote
        Warranty Policy
        We provide 1 year warranty for all remaining parts.
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        Return Notice
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
        Shipping Mode
        Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.
        Parts Availability
        Apter Power offers a wide range of components, products and services related to industrial automation. We also supply new products from a variety of quality manufacturers.
        How to order
        We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online. If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.

        Technical specifications for 6ES7132-7GD00-0AB0

        • Manufacturer:
          Siemens
        • Part Number:
          6ES7132-7GD00-0AB0
        • Product Family:
          Siemens Simatic DP
        • Product Type:
          ET 200iSP 4-Channel Intrinsically Safe Digital Output Module
        • Stock:
          1
        • Hardware Functional Status:
          FS 07
        • Firmware Version:
          V3.0.0
        • Digital Outputs:
          4 transistor outputs
        • Output Signal Level:
          23.1 V DC / 20 mA
        • L-Shutdown Input:
          1 intrinsically safe input
        • Address Space:
          2 bytes
        • Typical Module Current:
          290 mA
        • Maximum Current with Actuator Supply:
          340 mA
        • Backplane Bus Current:
          10 mA
        • Typical Power Loss:
          2.5 W
        • Output Short-Circuit Protection:
          Electronic
        • Internal Output Resistance:
          275 Ω
        • Switch-On Delay:
          2 ms
        • Switch-Off Delay:
          1.5 ms
        • Resistive Switching Frequency:
          100 Hz maximum
        • Inductive Switching Frequency:
          2 Hz maximum
        • Maximum Cable Length:
          500 m
        • Channel Diagnostics:
          Wire break and short circuit
        • CPU STOP Response:
          Substitute value or keep last value
        • Isolation:
          Backplane and load voltage isolated; outputs share one potential group
        • Maximum Operating Temperature:
          70 °C
        • Weight:
          0.765 lbs (0.347 kg)
        • Estimated shipping dimensions:
          13.8x16.2x4.3cm
        • Tariff Code:
          85389091
        • Country of origin:
          Germany
        • Place of shipment:
          Xiamen,Fujian,China
        By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

        More Information

        Overview Manuals Output Channels L-Shutdown Ex Wiring Diagnostic Flow

        Features:

        • Four intrinsically safe transistor channels control Ex i field actuators.
        • The separate L-shutdown input removes the output signals outside normal process-image control.
        • Channel diagnostics report wire-break and short-circuit conditions through ET 200iSP.
        Controller output bits are transferred across the ET 200iSP backplane to the four field channels.

        The shared load-side potential supplies the actuator paths while galvanic isolation separates them from the station bus.

        Diagnostic status and the configured CPU STOP behavior return the module condition to the controller.

        The Siemens 6ES7132-7GD00-0AB0 ET 200iSP Digital Output Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
        Siemens 6ES7132-7GD00-0AB0 ET 200iSP Digital Output Module Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

        Moving controller data into four Ex i actuator paths

        • Process image: Two output bytes carry the four channel commands and the L-shutdown control data.
        • Shared potential: All four transistor outputs use one load-side reference.
        • Actuator path: Each command becomes a 23.1 V DC/20 mA field signal.
        • Channel status: Wire break and short circuit are assigned to the affected output.

        Separating shutdown action from normal output commands

        • Safe input: The intrinsically safe L signal enters through its dedicated circuit.
        • Output action: The module removes all four actuator signals when shutdown is asserted.
        • Process image: Normal controller commands remain distinct from the shutdown path.
        • Restart state: Output behavior follows the documented enable and CPU STOP configuration.

        Keeping the field circuits inside the documented intrinsic-safety boundary

        • Potential group: The four outputs share one common load-side electrical group.
        • Galvanic separation: The load circuits remain isolated from the backplane bus.
        • Cable boundary: The shielded or unshielded field route stays within 500 m.
        • Mounting context: The module operates in its assigned ET 200iSP station position.

        Returning output faults to the controller without mixing channel identities

        • Wire break: An open field path creates a channel diagnostic.
        • Short circuit: Excess current is detected by the electronic output protection.
        • Module state: Backplane diagnostics distinguish module-level and channel-level conditions.
        • CPU response: Substitute value or last-value behavior is applied when the controller stops.
        Description
        Siemens 6ES7132-7GD00-0AB0 is a four-channel intrinsically safe digital output module for the SIMATIC ET 200iSP distributed I/O system. Its role is to translate controller output data into four Ex i actuator signals while accepting a separate intrinsically safe L-shutdown command.

        The four transistor paths of 6ES7132-7GD00-0AB0 share one potential group, so their 23.1 V DC/20 mA field circuits use the same load-side reference. Each channel remains individually represented in the two-byte output address and reports wire-break or short-circuit conditions through the station diagnostics.

        When the L-shutdown input changes state, 6ES7132-7GD00-0AB0 removes the actuator outputs independently of the controller process image. During a CPU STOP event, the configured response selects either substitute values or the last valid output state, keeping the safety-related shutdown path distinct from normal program control.

        The backplane and load sides of 6ES7132-7GD00-0AB0 are galvanically separated, while the four outputs are not isolated from one another. This organization links the module position, common potential, Ex i wiring rules and 500 m cable boundary to the same field-circuit design.
        Alternative Names
        6ES71327GD000AB0 6ES7 132-7GD00-0AB0 6ES7132 7GD00 0AB0 Siemens 6ES7132-7GD00-0AB0 6ES7132-7GD00-0AB0 ET 200iSP ET 200iSP 6ES7132-7GD00-0AB0 6ES 7132 7GD00 0AB0 6ES7132/7GD00/0AB0
        Technical notes
        The outputs of Siemens 6ES7132-7GD00-0AB0 share one potential group, while the load side remains isolated from the backplane bus.
        Exceptional Service

        Our Mission

        • 100% Satisfaction

          We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.

        • Trust Guaranteed

          Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.

        • Expertise

          Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

        FAQS

        The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
        VIEW ALL FAQS
        Why can Siemens 6ES7132-7GD00-0AB0 report a fault when the actuator command is off?
        Siemens 6ES7132-7GD00-0AB0 can supervise the field path independently of the command; check the Ex i loop, terminal connection, common potential and diagnostic parameter.
        How does the L-shutdown input affect 6ES7132-7GD00-0AB0?
        The intrinsically safe L input of 6ES7132-7GD00-0AB0 removes all four output signals independently of the normal controller output bits.
        What should be checked when one Siemens 6ES7132-7GD00-0AB0 output does not energize?
        For Siemens 6ES7132-7GD00-0AB0, compare the process-image bit, L-shutdown state, channel diagnostic, shared potential, field polarity, cable continuity and actuator current.
        Why do all four channels on 6ES7132-7GD00-0AB0 need the same potential-group review?
        The outputs of 6ES7132-7GD00-0AB0 are not isolated from one another, so their common load-side reference and Ex i circuit assignment must be evaluated together.
        Which CPU STOP options apply to Siemens 6ES7132-7GD00-0AB0?
        Siemens 6ES7132-7GD00-0AB0 can apply configured substitute values or retain the last valid values when the CPU enters STOP.

        You May Also Like

        Product Browsing History