Features:
- Four current channels: one module accepts documented 2-wire or 4-wire transducers
- Operational parameter changes: reparameterization is supported while the station runs
- Channel-level visibility: diagnostics and value status support signal assessment
6ES7134-6GD01-0BA1 concentrates four standard current inputs in the compact ET 200SP I/O format.
Selectable channel ranges let the same module handle common process-current tasks without treating every transducer as electrically identical.
The distinction between online reparameterization and stopped calibration gives engineers a clear maintenance boundary.
Apter Power can review the 6ES7134-6GD01-0BA1 BaseUnit, wiring, function status, official documentation, and quotation scope.
Siemens 6ES7134-6GD01-0BA1 SIMATIC ET 200SP AI 4xI 2-/4-Wire ST Analog Input Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- BaseUnit family: Siemens identifies A0 and A1 types.
- Transducer modes: channels support documented 2-wire and 4-wire connections.
- Supply reference: the module operates from the ET 200SP 24 V DC potential group.
- Wiring decision: match the channel diagram to the selected current mode.
- Online change: reparameterization in RUN is supported.
- Calibration limit: calibration in RUN is not supported.
- Project control: coordinate parameter edits with the process state.
- Maintenance effect: reserve calibration work for a controlled intervention.
- Conversion: the analog values use 16-bit resolution.
- Process image: four channels occupy eight input bytes.
- Value status: an additional byte can report channel quality.
- Fault visibility: channel diagnostics depend on the enabled parameter set.
- Distributed process-current acquisition: collect up to four 2-wire or 4-wire analog signals.
- ET 200SP cabinet expansion: add standard analog channels on an A0 or A1 BaseUnit.
- Condition-aware measurement: expose channel diagnostics and value status to the control program.
- Online parameter maintenance: adjust supported settings while respecting the calibration stop boundary.