Features:
- Four safe outputs: Controls four documented 24 VDC safety-related field circuits.
- 2 A channels: Supports up to 2 A per output with a 6 A module total.
- PL e / SIL 3: Provides the documented fail-safe output capability for high-integrity applications.
The module combines output switching and safety diagnostics within a 15 mm ET 200SP position.
BaseUnit type, F-address and safety-project parameters are part of the working configuration.
Field-load current and module-total current must remain within their separate limits.
Apter Power provides official documents and ET 200SP safety-configuration support for 6ES7136-6DB00-0CA0.
Siemens 6ES7136-6DB00-0CA0 SIMATIC ET 200SP F-DQ 4x24 VDC/2A PM HF Module Manuals,Datasheets,Link
Important Notice: Verify the complete catalog number, document revision and installed-system configuration before use.
- Channel count: Provides four fail-safe transistor outputs.
- Rated voltage: Controls documented 24 VDC field loads.
- Channel current: Supports up to 2 A on each output.
- Module current: Limits the combined output current to 6 A.
- Performance level: Supports applications up to PL e when correctly engineered.
- Safety integrity: Supports applications up to SIL 3 when correctly configured.
- Safety project: F-address and parameterization must agree with the approved program.
- Proof validation: Any hardware change requires approved safety validation and completion of the documented proof test.
- Short circuit: Channel diagnostics can indicate a shorted field path.
- Open circuit: Configured monitoring can identify an interrupted load path.
- Overload: Module diagnostics report excessive output loading.
- BaseUnit: The electronic module uses the documented A0 BaseUnit arrangement.
- Emergency shutdown: Drives documented safe-state actuators in distributed machine systems.
- Safety interlocking: Controls field devices used in protective interlock functions.
- Fail-safe valves: Supports 24 VDC solenoids within an engineered safety loop.