Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 6ES7650-8EK80-0AA0

All in stock · Add one and it is quoted together with the model, one shipping cost.

6ES7650-8EK80-0AA0

Siemens 6ES7650-8EK80-0AA0 is an ET 200PA SMART 32-channel digital output module that switches 24 V DC solenoids, contactors and signal lamps from controller output data.

In Stock Ships by Monday, November 23 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 6ES7650-8EK80-0AA0

6ES7650-8EK80-0AA0Siemens ET 200PA SMART DO32x24VDC/0.5A Digital Output Module
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Siemens
Part Number
6ES7650-8EK80-0AA0
Product Family
Siemens Simatic PCS 7 System
Product Type
ET 200PA SMART DO32x24VDC/0.5A Digital Output Module
Stock
1
Weight
0.6614 lbs (0.3 kg)
Estimated shipping dimensions
4x12.5x12cm
Tariff Code
85389091
Country of origin
Germany
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • Switches thirty-two 24 V DC field loads from four bytes of ET 200PA SMART output data.
  • Separates the outputs into four isolated eight-channel groups with individual load-potential paths.
  • Supports redundant load control while retaining the documented channel and group current limits.
The output image maps sequentially across the thirty-two channels, allowing each controller bit to command one protected field path.

Each eight-channel group shares its assigned L+ and M reference while remaining isolated from the other groups and the backplane bus.

Mounting direction and ambient temperature determine the permissible group current, so the 0.5 A channel value cannot be multiplied without checking derating.

The Siemens 6ES7650-8EK80-0AA0 ET 200PA SMART DO32x24VDC/0.5A Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6ES7650-8EK80-0AA0 ET 200PA SMART DO32x24VDC/0.5A Module Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Tracing four output bytes through four isolated groups

  • Process image: Four controller bytes address channels 0 through 31 in sequence.
  • Group layout: Every eight consecutive channels share one isolated load-potential group.
  • L+ and M: Each group receives its assigned 24 V supply and reference connection at the front connector.
  • Isolation: The groups are electrically separated from one another and from the backplane interface.

Connecting a shared load to two output paths

  • Output pair: The documented arrangement joins one output from each module to the same field load.
  • Reference: Both participating modules use the same M reference potential.
  • Protection: The redundant circuit does not require an additional external protection network.
  • Current boundary: Parallel control does not increase the rated output current of the connected load path.

Applying load type and switching-rate limits

  • Resistive load: The channel can switch a resistive circuit at the documented frequency within its current range.
  • Inductive load: Internal trip-voltage limiting controls the turn-off energy of contactors and solenoids.
  • Lamp load: The lamp-power and switching-frequency limits apply separately from the 0.5 A current rating.
  • Delay: On and off transition delays define when the field circuit follows a changed output bit.

Reading channel state without configurable diagnostics

  • Channel LED: A green indication follows the switching state of the assigned output path.
  • SF indication: The red group-fault LED reports a module-level condition.
  • Short circuit: Electronic protection limits an overcurrent on the affected field output.
  • Diagnostic boundary: The standard 0AA0 version has no configurable diagnostics or diagnostic interrupt.

Description

Siemens 6ES7650-8EK80-0AA0 is an ET 200PA SMART standard digital output module that converts four output bytes from the station backplane into thirty-two 24 V DC field switching paths. The outputs serve solenoid valves, DC contactors and signal lamps through a 40-pin front connection.

The channels of 6ES7650-8EK80-0AA0 are divided into four electrically isolated groups of eight. Each group receives its own L+ and M load-potential connection, so the current limit applies to the active outputs within that group rather than to a single undivided module supply.

Redundant control with 6ES7650-8EK80-0AA0 connects two module outputs to one load while both modules use the same M reference potential. This arrangement is supported without an external protection circuit, but the per-channel and per-group current boundaries remain unchanged.

Channel LEDs and the SF group indication on 6ES7650-8EK80-0AA0 show commanded output and module condition, while electronic short-circuit protection limits a faulted load path. The standard 0AA0 module does not generate configurable diagnostics, diagnostic interrupts or substitute output values.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

May
ChinaBently Nevada

Bently Nevada Audit: Zero Discrepancies, USD 25,000 Order

A customer verified Bently Nevada accelerometers, cables and 3500/22M modules at Apter Power. Zero discrepancies led to a USD 25,000 order paid three hours later.

3 hrsOrder to payment
$25,000Follow-up order
“ Apter Power gave us the evidence to approve the expansion with confidence. — Customer procurement manager ”
May · China · 2026
Read the full case study
Miya
ChinaQuality Inspection & Traceability

ISO 9001:2015 Quality Management Certification

Review the ISO 9001:2015 certificate for Apter Power, its certified scope, certificate number, validity, process-control purpose and the limits of management-system certification.

ISO 9001Certified quality system
TraceableDocumented order records
“ Certification matters only when the process is visible in everyday work—from the first requirement review to the final release. — Miya ”
Miya · China · August 2026
Read the full case study
Leonia
IndiaSiemens SIMATIC S7-400 PS 407 · 6ES7407-0DA01-0AA0

Siemens PS 407 Verified for an Indian Textile Plant

An Indian textile manufacturer asked Apter Power to verify Siemens SIMATIC S7-400 PS 407 module 6ES7407-0DA01-0AA0 by complete catalogue number, visible condition and packaging evidence before the next supply decision.

24/7Textile plant support
100%Inspected for Original & New product
“ Apter made our first overseas purchase of Siemens S7-1200 spares straightforward, with clear model confirmation and delivery arrangements. — Singh ”
Leonia · India · 9 October 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

How are the outputs of Siemens 6ES7650-8EK80-0AA0 divided?

Siemens 6ES7650-8EK80-0AA0 divides its thirty-two channels into four isolated groups of eight, each with an assigned L+ and M path.

What must be checked before loading all channels of 6ES7650-8EK80-0AA0?

For 6ES7650-8EK80-0AA0, compare the total current in each group with the limit for the actual mounting direction and temperature.

Can 6ES7650-8EK80-0AA0 control one load redundantly?

The documented 6ES7650-8EK80-0AA0 circuit permits two modules to control one load when both use the same M reference.

Why is a 0.5 A channel rating not the only load check for Siemens 6ES7650-8EK80-0AA0?

Siemens 6ES7650-8EK80-0AA0 also limits total group current, lamp power, switching frequency and ambient-temperature loading.

Does Siemens 6ES7650-8EK80-0AA0 provide substitute output values?

Siemens 6ES7650-8EK80-0AA0 does not provide substitute value output, configurable diagnostics or a diagnostic interrupt.

Which connector carries the field outputs of 6ES7650-8EK80-0AA0?

The thirty-two field channels and four load-potential groups of 6ES7650-8EK80-0AA0 terminate through its 40-pin front connector.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

6ES7400-2JA00-0AA0
The SIEMENS 6ES7400-2JA00-0AA0 is a UR2-H backplane rack for the SIMATIC S7-400H series. This rack is designed to house two central racks or expansion racks within a single unit, suitable for compact setups of redundant S7-400H systems.
6ES7650-8PB00-0AA0
Siemens 6ES7650-8PB00-0AA0 is the standard ET 200PA SMART active bus module that seats two IM 650-8PH interface modules for redundant operation.
In stock
6DL1164-6GH00-0PH1
Siemens 6DL1164-6GH00-0PH1 is an ET 200PA SMART+ analog input module that converts sixteen two-wire current signals into process values while supplying and monitoring each transmitter channel.
In stock
6DL1165-6TF00-0PH1
Siemens 6DL1165-6TF00-0PH1 is an ET 200PA SMART+ HART analog output module that converts eight process-control values into current signals for field devices.
In stock
6ES7134-7TD50-0AB0
Siemens 6ES7134-7TD50-0AB0 is a SIMATIC ET 200iSP four-channel analog input module for 4-wire 4–20 mA transmitters with HART communication in hazardous-area stations.
In stock
6ES7650-1AH61-5XX0
Siemens 6ES7650-1AH61-5XX0 is a six-channel fail-safe analog input HART marshalled termination assembly for connecting ET 200M module 6ES7336-4GE00-0AB0 with field transmitters.
In stock
6ES7650-8BK60-0AA0
Siemens 6ES7650-8BK60-0AA0 is an ET 200PA SMART isolated analog output module with eight voltage or current channels, 11/12-bit resolution, diagnostics, and a 40-pole connection for IM 650-8PH.
In stock
6ES7653-2CM00-0XB0
The Siemens 6ES7653-2CM00-0XB0 PCS 7 system expansion card sets a CPU 410 SMART to 800 process objects with 8 MB of work memory.
In stock
6ES7650-1AA51-2XX0
Siemens 6ES7650-1AA51-2XX0 is a PCS 7 ET 200M analog input marshalling assembly that routes eight field channels to redundant input modules.
In stock
6DL1132-6BH00-0PH1
Siemens 6DL1132-6BH00-0PH1 is an ET 200SP HA 16-channel digital output module that switches 24 V DC field loads and returns channel diagnostics to the control system.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat