Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with 6DL1132-6BH00-0PH1

All in stock · Add one and it is quoted together with the model, one shipping cost.

6DL1132-6BH00-0PH1

Siemens 6DL1132-6BH00-0PH1 is an ET 200SP HA 16-channel digital output module that switches 24 V DC field loads and returns channel diagnostics to the control system.

In Stock Ships by Monday, November 23 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for 6DL1132-6BH00-0PH1

6DL1132-6BH00-0PH1Siemens ET 200SP HA DQ 16x24VDC/0.5A Digital Output Module
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Siemens
Part Number
6DL1132-6BH00-0PH1
Product Family
Siemens Simatic PCS 7 System
Product Type
ET 200SP HA DQ 16x24VDC/0.5A Digital Output Module
Stock
1
Weight
0.6614 lbs (0.3 kg)
Estimated shipping dimensions
15x3.5x13cm
Tariff Code
85389091
Country of origin
Germany
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • Switches sixteen current-sourcing 24 V DC outputs from the ET 200SP HA backplane.
  • Reports wire break, short circuit, supply and module conditions through channel diagnostics.
  • Supports the documented M1 terminal-block arrangement for redundant load control.
The two-byte output image drives the channel switches while two quality-information bytes report output validity.

Per-channel protection limits the effect of a field wiring fault without turning diagnostic data into a separate signal path.

Current capacity depends on total module load, mounting direction and ambient temperature rather than on one channel rating alone.

The Siemens 6DL1132-6BH00-0PH1 ET 200SP HA Digital Output Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6DL1132-6BH00-0PH1 DQ 16x24VDC/0.5A HA Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Relating controller bits to protected field outputs

  • Process image: Two output bytes carry the controller commands for sixteen channels.
  • Switch stage: Each command controls a current-sourcing 24 V DC load path.
  • Quality data: Two QI bytes return the validity of the commanded output image.

Applying channel and module current limits together

  • Channel: One output supplies up to 0.5 A to its assigned field load.
  • Module: The sum of active loads remains within the installation-dependent module limit.
  • Inductive load: The internal clamp limits the shutdown voltage when an inductive circuit opens.

Separating an output command from a field-circuit fault

  • Wire break: The test current lets the module detect an interrupted channel circuit.
  • Short circuit: Channel protection and the red diagnostic indication identify a faulted output path.
  • Supply: The PWR and DIAG indicators distinguish load-supply loss from a channel condition.

Routing one load through a documented redundant pair

  • Terminal block: M1 provides the station arrangement required for I/O redundancy.
  • Output pair: Two channels can control one load redundantly without increasing its rated current.
  • Shared limits: Both channels remain subject to module current and temperature derating.

Description

Siemens 6DL1132-6BH00-0PH1 is an ET 200SP HA digital output module that places sixteen protected 24 V DC source outputs between the station backplane and field actuators. The controller writes two output bytes, and the module switches the corresponding load paths while returning quality information to the station.

Across 6DL1132-6BH00-0PH1, each channel is limited to its documented current and has wire-break, short-circuit and overload supervision. Channel status and diagnostic LEDs separate a commanded output state from a wiring or load fault.

When redundant load control is required, 6DL1132-6BH00-0PH1 uses the M1 terminal-block arrangement and pairs outputs according to the ET 200SP HA redundancy rules. The module current limit still applies to the combined set of active channels and changes with installation position and ambient temperature.

Power for 6DL1132-6BH00-0PH1 enters through the 24 V DC load-supply path, while the backplane carries commands, diagnostics and configuration data. The field side is isolated from the backplane bus, but the individual output channels share the module load-potential organization.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

Jim
Xiamen, ChinaBently Nevada

A Practical Bently Nevada 3500 Plan to Cut Factory Downtime

A practical factory deployment plan connecting 3300 XL proximity probes, a Bently Nevada 3500 rack, DCS/PLC systems and System 1 software to detect rotating-equipment risks earlier and support predictive maintenance.

3 LayersSensors to diagnostics
4 StepsPlanning to maintenance
“ A 3500 project starts with understanding machinery risks and maintenance needs. — Jim ”
Jim · Xiamen, China · 2026
Read the full case study
Miya
ChinaQuality Inspection & Traceability

ISO 9001:2015 Quality Management Certification

Review the ISO 9001:2015 certificate for Apter Power, its certified scope, certificate number, validity, process-control purpose and the limits of management-system certification.

ISO 9001Certified quality system
TraceableDocumented order records
“ Certification matters only when the process is visible in everyday work—from the first requirement review to the final release. — Miya ”
Miya · China · August 2026
Read the full case study
Leonia
IndonesiaBently Nevada 3500/22M 288055-01

On-Site Verification for an Indonesian Power Plant

After a previous suspected-counterfeit purchase, an Indonesian power-plant customer used a 50/50 payment plan, visited Apter Power to inspect two Bently Nevada 3500/22M 288055-01 modules, requested COO documentation and approved next-day hotel delivery.

100%Modules inspected on site
50/50Deposit / balance after inspection
“ They are very professional and supply quality products. I have purchased Bently Nevada products from them and had a very good experience. — Tri ”
Leonia · Indonesia · May 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

Why can Siemens 6DL1132-6BH00-0PH1 report a wire break on an output?

Siemens 6DL1132-6BH00-0PH1 applies a small diagnostic test current and evaluates the channel response even when the commanded load is off.

Which terminal block enables redundancy for 6DL1132-6BH00-0PH1?

The M1 terminal-block arrangement enables the documented I/O-redundancy configuration for 6DL1132-6BH00-0PH1.

How should the total load of Siemens 6DL1132-6BH00-0PH1 be calculated?

Add the current of all active 6DL1132-6BH00-0PH1 channels and compare it with the limit for the actual mounting direction and temperature.

What do the QI bytes from 6DL1132-6BH00-0PH1 represent?

The QI bytes of 6DL1132-6BH00-0PH1 report whether the corresponding output information is valid for controller processing.

Can Siemens 6DL1132-6BH00-0PH1 drive lamp and inductive loads?

Siemens 6DL1132-6BH00-0PH1 drives documented lamp, resistive and inductive loads when channel current and switching-frequency limits are observed.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

6ES7653-2CE00-0XB0
6ES7653-2CE00-0XB0 is a SIMATIC PCS 7 system expansion card that provides support for up to 1000 process objects for the PCS 7 CPU 410-5H controller.
6ES7650-1AA61-2XX0
For ET 200M HART analog input wiring, Siemens 6ES7650-1AA61-2XX0 provides eight field channels, redundant power connections and dual I/O-module connectors.
In stock
6ES7650-1AH62-5XX0
Siemens 6ES7650-1AH62-5XX0 is a six-channel F-AI HART termination assembly that connects field transmitters, redundant power, and one or two ET 200M fail-safe analog input modules.
In stock
6ES7650-1AB51-2XX0
Siemens 6ES7650-1AB51-2XX0 is a redundant eight-channel analog output MTA that connects paired ET 200M output modules to field current loops.
In stock
6ES7650-8BK60-0AA0
Siemens 6ES7650-8BK60-0AA0 is an ET 200PA SMART isolated analog output module with eight voltage or current channels, 11/12-bit resolution, diagnostics, and a 40-pole connection for IM 650-8PH.
In stock
6ES7653-2CM00-0XB0
The Siemens 6ES7653-2CM00-0XB0 PCS 7 system expansion card sets a CPU 410 SMART to 800 process objects with 8 MB of work memory.
In stock
6ES7650-8EK80-0AA0
Siemens 6ES7650-8EK80-0AA0 is an ET 200PA SMART 32-channel digital output module that switches 24 V DC solenoids, contactors and signal lamps from controller output data.
In stock
6ES7157-0AF81-0XA0
Siemens 6ES7157-0AF81-0XA0 is a SIMATIC DP active field distributor that connects a redundant PROFIBUS PA ring to four short-circuit-proof field-device spurs with automatic bus termination.
In stock
6ES7650-8PC00-1AA0
Within ET 200PA SMART, Siemens 6ES7650-8PC00-1AA0 is a coated bus module that holds two 40 mm I/O modules and maintains their station-bus connection.
In stock
6ES7650-1BD51-0XX0
In a redundant ET 200M analog-input path, Siemens 6ES7650-1BD51-0XX0 is the MTA FET switch adapter that isolates an unpowered FAI module from its active partner.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat