Features:
- Capacity: 4 MB flash storage for supported Siemens automation devices.
- Electrical identity: 3.3 V SIMATIC Memory Card.
- Installed-data role: retains project or device data through an approved engineering workflow.
The exact 6ES7954-8LC04-0AA0 code identifies the active 4 MB SIMATIC Memory Card.
Host compatibility and the controlled content of the card must be reviewed together.
A recovery copy is accepted only after the target CPU or drive recognizes it and resumes the documented application.
Apter Power supports exact-article review and quotation for Siemens 6ES7954-8LC04-0AA0.
Siemens 6ES7954-8LC04-0AA0 SIMATIC Memory Card Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Storage medium: 4 MB removable flash card.
- Host families: official listing covers S7-1200, S7-1500 and SINAMICS.
- Voltage identity: the card is specified for 3.3 V operation.
- Article control: capacity alone does not replace the full Siemens number.
- Source protection: keep the original card write-protected or otherwise isolated.
- Project traceability: associate each image with the machine and engineering revision.
- Copy method: use the approved Siemens engineering or service procedure.
- Archive: retain a verified offline copy before reusing media.
- Visual inspection: reject damaged contacts or cracked media.
- Host recognition: verify the CPU or drive identifies the card without diagnostics.
- Program match: compare the loaded project and hardware configuration.
- Release: prove startup, communications and controlled functions before production.
- S7-1200 maintenance: stores supported controller project data.
- S7-1500 service: provides the required removable load-memory path.
- SINAMICS recovery: carries supported drive data within the approved workflow.
- Controlled spares: supports staged recovery media tied to a documented machine revision.