Features:
- Type B identity: the exact spare belongs to the IRB 2600 motor-generation boundary
- Third-axis position: service preparation rests the upper arm securely on its damper
- Pinion-inclusive scope: removal and refitting protect the gear mesh and flange seal
3HAC046599-001 is not interchangeable merely because another IRB 2600 motor occupies the same general arm area.
The official procedure differentiates axis-3 brake wiring, motor orientation, flange preparation, oil restoration, and fastener torque.
No verified exact-product shipping weight or dimensions were available, so the corresponding logistics fields are intentionally blank.
Apter Power can review 3HAC046599-001 article markings, Type B identity, axis assignment, pinion and connector condition, and service records.
ABB 3HAC046599-001 IRB 2600 Axis-3 Motor with Pinion, Type B Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Robot position: axis 2 at 0 degrees and axis 3 at maximum positive
- Arm support: release the brake until the upper arm rests on its damper
- Connection: use R2.MP3 pins 2 positive and 5 negative
- Tooling: install guide and removal tools in opposing pairs
- Generation check: confirm Type B before accepting the motor
- Wire exit: return the axis-3 opening to the illustrated orientation
- Flange seal: grease and seat a sound O-ring fully
- Pinion engagement: lower the motor gently without forcing the gears
- Fasteners: tighten four M8x25 screws to 22 Nm
- Gearbox: refill axis-3 oil after the motor is installed
- Enclosure: restore the internal bracket, cables, gasket, and rear cover
- Release: recalibrate and complete ABB's first-run safety checks
- IRB 2600 axis-3 repair: replace the documented Type B motor-and-pinion assembly
- Arm-drive overhaul: control brake release, oil, sealing, and cable restoration
- Motor-generation matching: avoid unsupported Type A/Type B substitution
- Outage sourcing: match article, robot variant, axis, connector, and motor type