Features:
- RV-550N-252.33 reduction unit for a documented IRB 6700 axis-3 arrangement
- ABB Orange configuration identified in the spare-parts listing
- Complete robot variant and axis position remain part of the selection decision
3HAC048232-001 serves a defined mechanical position rather than a generic IRB 6700 spare role.
The useful maintenance value is controlled restoration of the documented axis-3 drivetrain while retaining the robot configuration recorded for the cell.
A sound work pack connects the installed label, axis evidence, lifting and isolation plan, mounting inspection, lubrication instructions, calibration steps, and return-to-service results.
The ABB 3HAC048232-001 gearbox may be available through Apter Power, subject to current sourcing and configuration review.
CABB 3HAC048232-001 IRB 6700 Axis-3 Industrial Robot Gearbox Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB 3HAC048232-001 IRB 6700 Axis-3 Industrial Robot Gearbox Specs
General
- ManufacturerABB
- Model3HAC048232-001
- ConditionNew Original ready stock
- Product FamilyABB Robots
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
IRB 6700 identity review
- Robot label: Capture the complete IRB 6700 type, serial number, payload, and reach designation.
- Axis evidence: Use the installed assembly and spare-parts list to establish the axis-3 position.
- Finish record: Retain the ABB Orange configuration in the sourcing and maintenance record.
Mechanical interface planning
- Reduction stage: Keep the RV-550N-252.33 designation tied to this complete order number.
- Interfaces: Inspect mating flanges, fasteners, seals, and surrounding components before installation.
- Service data: Apply the ABB procedure for lubrication, tightening, calibration, and controlled movement.
Axis-3 replacement record
- Before removal: Photograph labels, orientation, cable routing, witness marks, and mechanical damage.
- During work: Record isolation, lifting, removed hardware, inspections, and approved consumables.
- Handover: Archive calibration values, test motions, alarms, and the final robot backup.