Features:
- Frame 2 Kinetix 5300 400 V-class servo drive
- 6.25 kW output at the documented 480 V three-phase condition
- 11.7 A rms continuous and 34.1 A rms peak output current
Allen-Bradley
2198-C4030-ERS accepts 342...528 V rms three-phase input and provides Integrated Motion over EtherNet/IP with standard hardwired Safe Torque Off (STO).
Official design data documents Kinetix TLP rotary motor and Kinetix LDC linear motor combinations for this Frame 2 drive.
Confirm the motor or actuator torque-speed profile, cooling, feedback and brake interfaces, controller configuration, cable set, branch protection, axis duty, regeneration, and STO wiring before selection or migration.
Availability, condition, price, and shipping time for 2198-C4030-ERS are confirmed during quotation.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Documented drive efficiency is 97%
- Line-loss ride-through is specified as 20 ms
- The internal shunt is rated 60 ohm and 50 W, with 775 V on and 765 V off thresholds
- Kinetix 5300 firmware can be updated with ControlFLASH Plus or ControlFLASH software
- Rockwell Automation recommends ControlFLASH Plus for drive firmware updates
- 24 V control power must be present and the axis must be in an allowed non-running state before updating
- Module and network status indicators are located below the four-character display
- Module status identifies operational, standby, recoverable major-fault, and unrecoverable major-fault states
- Network status identifies an established connection, connection timeout, or duplicate IP address
- Rotary servo axes using documented TLP-B115-200, TLP-B145-250, or TLP-B200-300 combinations
- Linear axes using documented LDC-C075400-DHT, LDC-C100300-DHT, or LDC-C100400-DHT combinations
- Electronics assembly, packaging and converting, or printing and web machines after application-specific sizing