Features:
- Output group: eight 24 V DC sourcing channels
- Load capacity: official per-channel and total-module current limits
- Protection boundary: plain catalog has no electronic output protection
1734-OB8 is used to drive eight DC field loads from a compact POINT I/O position.
The difference between channel current and total module current governs how the loads are distributed.
External protection and suppression are important because this catalog is not the electronically protected OB8E variant.
Availability of 1734-OB8 is subject to Apter Power inventory and sourcing confirmation.
Allen-Bradley 1734-OB8 POINT I/O 8-Point Digital Source Output Module Manuals and Product Resources
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Allen-Bradley 1734-OB8 POINT I/O 8-Point Digital Source Output Module Specs
General
- ManufacturerAllen-Bradley
- Model1734-OB8
- ConditionNew Original ready stock
- Product FamilyPOINT I/O 1734
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Allocate the eight loads
- Channel demand: calculate running current for each output.
- Module total: keep the combined load within the official limit.
- Polarity: wire loads for a sourcing output architecture.
- Functional test: verify command, terminal voltage, and device response.
Manage switching stress
- Inrush: compare load surge with the published short-duration rating.
- Protection: provide appropriate external overcurrent control.
- Inductive loads: apply suppression at the field device.
- Fault review: inspect wiring and load condition before replacing the module.
Supported product applications
- DC solenoids: switch suitable 24 V DC loads with suppression.
- Indicator circuits: control multiple low-current field devices.
- Machine outputs: distribute eight sourcing commands near equipment.
- Panel replacement: restore a standard unprotected source-output position.