- Single-axis Kinetix 300 platform with EtherNet/IP communications
- Removable memory-module socket supports documented parameter storage and service workflows
- Dedicated mains, DC-bus and shunt, backup-power, I/O, motor-power, and feedback connections
Allen-Bradley
2097-V34PR3 operates as one independently configured indexing axis and exchanges commands, status, and diagnostic information through its documented control interfaces.
The machine configuration includes the controller or indexing method, network and I/O assignments, motor and feedback selection, homing and limits, protection settings, and safety circuit.
Confirm the complete Series 1 nameplate, saved parameter set, connector hardware, motor and feedback cables, external shunt selection, enclosure clearances, grounding, and the engineering requirements of replacement 2198-E4007-ERS before commissioning.
Availability, condition, price, and shipping time for 2097-V34PR3 are confirmed during quotation.
Allen-Bradley 2097-V34PR3 Kinetix 300 EtherNet/IP Indexing Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The drive mounts vertically on a zinc-plated, paint-free steel subpanel
- M4 or number 6-32 steel mounting hardware is tightened to 1.1 N·m
- Enclosure clearances and ventilation must meet the Kinetix 300 installation requirements
- The 50-pin IOD connector carries the documented digital I/O functions
- 2097-TB1 is the documented drive-mounted I/O expansion block
- Input assignments, output behavior, and Safe Torque Off wiring must match the machine design
- The display and status indicators provide drive and EtherNet/IP diagnostic information
- Record the parameter archive, fault history, and network settings before removal
- Commissioning must confirm motor feedback, I/O, motion, and safety operation before production use
- Single-axis machinery using a supported Kinetix 300 motor-feedback combination
- Indexed positioning or coordinated motion according to the documented drive-family control architecture
- Legacy Kinetix axes undergoing controlled maintenance or engineered migration to 2198-E4007-ERS