Features:
- Longest unthreaded reach in this batch: 110 mm sensing section.
- Case envelope: 190 mm overall M10 x 1 body.
- Direct electrical path: 1.0 m option-02 standard lead.
The long nose reaches recessed targets while the 190 mm case remains shorter than the 200 mm deep-case variant.
A one-metre lead connects directly to the matching sensor and removes the extension-cable step.
Bracket stiffness, thread depth and cable routing deserve joint attention because the probe projection is substantial.
Apter Power supports technical documentation, quotation and configuration review for Bently Nevada 330103-11-19-10-02-00 3300 XL 8 mm Proximity Probe.
Bently Nevada 330103-11-19-10-02-00 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Match the complete ordering code, M10 x 1 port, case reach, electrical system length and required approval status to the documented machine configuration.
- Unthreaded section: 110 mm from the probe-tip end.
- Overall case: 190 mm metric body.
- Thread interface: M10 x 1 forward mount.
- Sensing element: unarmored 8.0 mm nominal tip.
- Integral lead: 1.0 m standard 75 ohm cable.
- Extension cable: not part of the one-metre system.
- Sensor path: direct connection to the corresponding Proximitor.
- Connector: option-02 ClickLoc without a factory protector.
- Bracket duty: support the 110 mm forward projection at the installed angle.
- Thread limit: M10 engagement remains 15 mm maximum.
- Cable exit: maintain the 25.4 mm minimum bend radius.
- Target clearance: preserve the gap range needed for the selected measurement.
- Recessed bearing targets: radial shaft-vibration sensing with long forward reach.
- Deep thrust collars: static axial-position measurement through an extended bracket.
- One-metre sensor locations: direct probe-to-Proximitor connection.
- Phase-reference points: Keyphasor sensing where the long nose reaches the target.