Features:
- Extended sensing reach: 80 mm unthreaded section for deeper target access.
- Long body: 150 mm overall M10 x 1 case.
- Direct lead: 1.0 m standard cable with option-02 ClickLoc connection.
The 80 mm nose suits deeper brackets without moving to the batch's longest 190 mm or 200 mm cases.
A one-metre lead connects directly to the matching sensor and does not use an extension cable.
The unprotected ClickLoc end allows connection protection to follow the actual enclosure or conduit design.
Apter Power supports technical documentation, quotation and configuration review for Bently Nevada 330103-08-15-10-02-00 3300 XL 8 mm Proximity Probe.
Bently Nevada 330103-08-15-10-02-00 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Match the complete ordering code, M10 x 1 port, case reach, electrical system length and required approval status to the documented machine configuration.
- Unthreaded section: 80 mm from the sensing tip.
- Overall case: 150 mm metric body.
- Thread interface: M10 x 1 standard forward mount.
- Probe construction: unarmored case with 8.0 mm nominal tip.
- Integral lead: 1.0 m standard 75 ohm cable.
- Extension cable: not used for the one-metre system.
- Sensor path: direct connection to the corresponding Proximitor.
- Connection end: ClickLoc option 02 without a fitted protector.
- Radial arrangement: bracket direction places the tip toward the shaft surface.
- Axial arrangement: target face supports static thrust-position measurement.
- Gap reference: the standard radial recommendation is approximately 1.27 mm.
- Target material: published performance assumes AISI 4140 steel calibration.
- Deeper bearing brackets: radial shaft-vibration channels requiring 80 mm reach.
- Long stand-off thrust points: static axial-position monitoring.
- Nearby one-metre sensor locations: direct cable path without an extension cable.
- Phase-reference points: Keyphasor sensing where the 150 mm case fits the bracket.