Features:
- Adds four analog output terminations to the optional Mark V signal set.
- Accepts four channels configurable for current or bipolar voltage input.
- Uses separate terminal ranges for outgoing and incoming analog traffic.
DS200TBQGG1A divides its available terminals into an output block at 25-32 and an input block at 33-44.
The four input positions accommodate either 4-20 mA current or +/-10 VDC signals, depending on the configured measurement path.
This TBQG function is an optional GHD feature rather than a universal Mark V termination set.
Apter Power coordinates sourcing and documented signal-path support for the General Electric DS200TBQGG1A termination board.
General Electric DS200TBQGG1A Mark V Analog I/O Termination Board Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Outgoing Channels
- Quantity: Four analog current-output channels are provided.
- Signal Form: Each outgoing path is designated for 4-20 mA.
- Terminal Block: The four outputs occupy positions 25 through 32.
Input Choices
- Input Bank: Four measurement paths occupy the TBQG receive side.
- Current Mode: Select the current-input configuration for a 4-to-20 mA transmitter.
- Voltage Mode: The alternative input form is +/-10 VDC.
- Terminal Block: Incoming channels use positions 33 through 44.
Configuration Scope
- Option Status: TBQG is identified as an optional Mark V feature.
- PROM Set: The documented allocation applies to the GHD PROM set.
- Signal Split: Outgoing and incoming circuits occupy separate terminal blocks.
Documented Context
- System: The signal allocation belongs to SPEEDTRONIC Mark V.
- Control Class: The feature is associated with gas-heavy-duty control configuration.
- Core Path: The documented TBQG terminations are tied to the S-core option.