• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      sales1@apterpower.com
      +86 181 0690 9650
      Request a

      Fast Quote

      Manufacturers
      ALL MANUFACTURERS
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        Manufacturers
        sales1@apterpower.com +86 181 0690 9650
        Choose a manufacturer
        ALL MANUFACTURERS
        Ask our team:
        • Phone: +86 181 0690 9650
        • E-Mail sales1@apterpower.com

        • Lifecycle status

          Active / Available from OEM
          Apter Power supplies the original Bently Nevada 130539-45 for long accelerometer signal routes requiring a fluorosilicone-booted plug and terminal-lug connections.

        130539-45

        / 4.9
        1001 reviews ｜ Need a Specific Revision?
        Bently Nevada 130539-45 45 ft (13.7 m) interconnect cable for 330400/330425 accelerometers, with 3-conductor shielded 18 AWG cable, fluorosilicone-booted 3-socket plug and terminal lugs.
        In Stock
        Ships by Friday, October 30
        Fast Shipping Available
        Get a quick price for 130539-45
        Quantity
        *E-mail
        Company
        *Mobile
        *Content
        Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
        Get a Quote
        Warranty Policy
        We provide 1 year warranty for all remaining parts.
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        Return Notice
        The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
        In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
        Shipping Mode
        Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.Various transportation options are available in each country. Shipping methods and fees are clearly indicated on all quotations.
        Parts Availability
        Apter Power offers a wide range of components, products and services related to industrial automation. We also supply new products from a variety of quality manufacturers.
        How to order
        We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online. If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.

        Technical specifications for 130539-45

        • Manufacturer:
          Bently Nevada
        • Part Number:
          130539-45
        • Product Family:
          330400 and 330425 Accelerometers
        • Product Type:
          Interconnect Cable
        • Stock:
          1
        • Cable Series:
          130539 booted interconnect cable
        • Cable Length:
          45 ft (13.7 m approx.)
        • Conductors:
          3-conductor shielded
        • Conductor Size:
          18 AWG (1.0 mm²)
        • Sensor-End Connection:
          3-socket plug with fluorosilicone elastomer boot
        • Field-End Connection:
          Terminal lugs
        • Compatible Transducers:
          Bently Nevada 330400 and 330425 accelerometers
        • Orderable Length Range:
          2 to 99 ft in 1 ft increments
        • Country of origin:
          United States
        • Place of shipment:
          Ships within 3 working days after order confirmation.
        By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

        More Information

        Overview Manuals Ordering Code Signal Routing Uses Sensor & Wiring Fit Installation Checks
        Bently Nevada 130539-45 cable configuration

        This 45 ft booted interconnect cable carries power and acceleration signals between a compatible Bently Nevada accelerometer and field termination or monitoring equipment.

        • Cable family: 130539 booted interconnect cable
        • Length: 45 ft (approximately 13.7 m)
        • Construction: 3-conductor shielded cable
        • Conductor size: 18 AWG (1.0 mm²)
        • Sensor end: 3-socket plug with fluorosilicone elastomer boot
        • Field end: terminal lugs
        • Primary compatibility: 330400 and 330425 accelerometers
        Bently Nevada 130539-45 Manuals and Datasheets

        Important Notice: Accelerometers, junction boxes, monitors, conduit, mounting hardware and calibration documentation are not included unless listed in the stock item description.

        130539-45 ordering code
        • 130539: 3-conductor shielded 18 AWG interconnect cable with booted 3-socket plug and terminal lugs
        • 45: cable length in feet
        • Metric equivalent: approximately 13.7 m
        • Ordering increments: one-foot increments from 2 to 99 ft
        • Length status: 45 ft is outside the published standard-length list and is ordered as a non-standard/custom length

        Confirm OEM availability and any custom-length surcharge before purchase.

        Where a 45 ft accelerometer cable is useful
        • Casing acceleration: connects 330400/330425 sensors used on compressors, turbines, pumps, motors, fans and gearboxes
        • Remote junction points: reaches field terminals located away from the bearing housing or machine casing
        • High-frequency monitoring: supports acceleration measurements used to identify impacts, gear-mesh activity and casing vibration
        • Retrofit wiring: provides a booted sensor connection and terminal-lug field end where an existing conduit route is retained
        • Long machinery skids: supports cable routing across packaged equipment while keeping the sensor close to the measurement point
        • Signal integrity: shielding helps control electrical interference when grounding and routing follow the official installation guidance

        The 45 ft run is well below the 305 m (1000 ft) maximum cable length specified for 330400/330425 accelerometer systems, but the complete field wiring still requires an installation review.

        Compatibility checks before replacement
        • Primary sensors: Bently Nevada 330400 and 330425 accelerometers
        • Sensor connector: confirm the cable's 3-socket plug matches the accelerometer's 3-pin MIL-C-5015 receptacle
        • Field wiring: identify and terminate all three conductors and the shield according to the accelerometer user guide
        • Cable family: 130539 uses 18 AWG conductors and a fluorosilicone boot; do not replace it with 16925 or 16710 without checking gauge, armor and environmental needs
        • Length fit: verify that 45 ft covers the installed route with service slack but does not create unnecessary coiled cable
        • 330450 use: the 130539 family is also listed for 330450 high-temperature acceleration systems; confirm the exact connector and wiring drawing before cross-application

        For a compatibility quotation, provide the accelerometer part number, existing cable number, monitor input and field-termination details.

        Field installation and procurement checks
        • Environmental protection: route the cable in protected conduit or an enclosure where the site requires it
        • Boot function: the fluorosilicone elastomer boot adds connector protection, but the sensor's IP rating does not automatically apply to the cable
        • Mechanical routing: avoid sharp bends, abrasion, unsupported movement and tensile load at the plug or terminal lugs
        • Noise control: separate the signal cable from high-power conductors and follow the official shield-grounding method
        • Hazardous areas: verify cable parameters, the complete system approval and the applicable entity or installation drawing
        • Temperature review: check the cable and boot limits for the actual route rather than applying the accelerometer's -55°C to +121°C rating to the cable
        • Custom length: confirm 45 ft OEM availability, pricing and delivery time before order placement

        State the sensor model, end-user country, hazardous-area classification, required certificates and delivery destination when requesting a quotation.

        Description

        The Bently Nevada 130539-45 is a 45 ft (approximately 13.7 m) booted interconnect cable for connecting 330400 and 330425 accelerometers to field wiring and machinery monitoring equipment. It uses 3-conductor shielded 18 AWG (1.0 mm²) cable to carry the accelerometer power and vibration signal over a long installation route.

        The sensor end has a 3-socket plug with a fluorosilicone elastomer boot, while the field end terminates in individual lugs. The 130539 family is ordered in one-foot increments from 2 to 99 ft; 45 ft is a non-standard length, so confirm OEM availability, custom-length pricing, routing distance and termination requirements before purchase.

        Alternative Names
        130539 45 13053945 Bently Nevada 130539 Cable 45 ft Bently Nevada 330400 Accelerometer Cable Bently Nevada 330425 Accelerometer Cable 45 ft Booted Interconnect Cable 18 AWG Accelerometer Signal Cable 130539-45 Terminal Lug Cable
        Technical notes
        The Bently Nevada 130539-45 provides a 45 ft (13.7 m) shielded run for 330400/330425 accelerometer installations where the monitor or junction point is remote from the sensor. Verify conduit routing, terminal-lug identification and custom-length availability before ordering.
        Exceptional Service

        Our Mission

        • 100% Satisfaction

          We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.

        • Trust Guaranteed

          Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.

        • Expertise

          Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

        FAQS

        The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
        VIEW ALL FAQS
        What is the Bently Nevada 130539-45?
        It is a 45 ft booted interconnect cable for connecting 330400 and 330425 accelerometers to field wiring or machinery monitoring equipment.
        What is the metric length of 130539-45?
        The 45 ft length is approximately 13.7 m.
        Is 45 ft a standard catalog length for the 130539 cable family?
        The current official datasheet lists several standard lengths but not 45 ft. Bently Nevada allows non-standard lengths from 2 to 99 ft in one-foot increments, normally at additional cost.
        What conductor configuration does this cable use?
        It uses three shielded 18 AWG conductors with a nominal conductor area of 1.0 mm².
        How is each end of the cable terminated?
        The sensor end has a 3-socket plug with a fluorosilicone elastomer boot, and the opposite end has terminal lugs for field wiring.
        Which accelerometers are compatible with 130539-45?
        The cable is listed for Bently Nevada 330400 and 330425 accelerometers. Confirm the sensor connector and monitoring-channel wiring before replacement.
        Can this cable be installed outdoors or in a hazardous area?
        Use protected conduit or an enclosure as required by the installation. The sensor approvals and IP rating do not automatically apply to the cable; verify the complete system drawing and site requirements.
        What information is needed for a quotation?
        Provide part number 130539-45, quantity, required length confirmation, accelerometer model, end-user country, certificates and delivery destination.

        You May Also Like

        Product Browsing History