Features:
- Three-wire shielded construction for reduced noise interference.
- Female accelerometer connector with monitor-side terminal lugs.
- 66-foot cable length for extended equipment-to-monitor connections.
Bently Nevada 16925-66 Cable provides a dedicated connection between a 330400 Accelerometer and compatible monitoring equipment. A three-conductor arrangement carries the accelerometer signal from the measurement point to the monitor. Shielding helps reduce the influence of surrounding electrical noise on the transmitted signal. Such construction supports more stable vibration measurements in industrial environments. The 66-foot length provides flexibility when the sensor and monitor are installed at separate locations.
Connection requirements differ at each end of an accelerometer cable. Bently Nevada 16925-66 Cable uses a female connector at the 330400 Accelerometer end for direct sensor attachment. Terminal lugs at the monitor end allow the individual conductors to be secured to compatible input terminals. The 0.5 mm² conductor size corresponds to 22 AWG. Such termination methods simplify integration into existing vibration-monitoring wiring arrangements.
Long cable runs can be exposed to interference from motors, power cables, and other electrical equipment. Bently Nevada 16925-66 Cable uses a shielded structure to help protect low-level accelerometer signals during transmission. A total length of 20.12 meters supports installations involving machinery located away from the monitoring cabinet. The cable is suitable for vibration-monitoring applications using the 330400 Accelerometer. Proper routing and termination help maintain reliable signal transfer across the complete connection.
The 16925-66 Bently Nevada Cable may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 16925-66 Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 16925-66 Cable Specs
General
- Manufacturer GE / Bently Nevada
- Model 16925-66
- Condition New Original ready stock
- Product Family
16925-40,16925-50,16925-60,16925-10
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Superior Anti-Interference Capability: Equipped with a braided shield, it effectively resists electromagnetic interference (EMI), ensuring undistorted low-level vibration signals.
- Insulation and Sheath: Typically made of FEP (fluorinated ethylene propylene), offering excellent chemical resistance and oil resistance.
- Temperature Range: Supports operation at extreme temperatures (typically -49°C to +177°C), suitable for installation near heat sources.
- High-Efficiency Connectivity: Features a 3-socket plug design for fast and robust connections to Bently Nevada's 330400 or 330425 accelerometer sensors.
- Vibration Diagnostic System: Acting as a bridge between sensors and data acquisition units, it detects early signs of failure such as bearing wear, rotor imbalance, or pump cavitation.
- Predictive Maintenance (PdM): Integrated into the plant-wide asset management system, it improves equipment availability and lifespan through continuous data flow.
- Power Generation: Monitoring the vibration of steam turbines, generators, and cooling tower gearboxes.
- Oil and Natural Gas: Equipment protection in refineries and pipeline compressor stations.
- Chemical and Water Treatment: Vibration monitoring of various centrifugal pumps, compressors, and fans.
- Manufacturing and Paper: Monitoring industrial motors and large rotating machinery to prevent unplanned shutdowns.