Features:
- Self-Contained Proximity Probe System with Integrated 3300 XL Proximitor Sensor
- Eliminates Extension Cable Requirements and Separate Proximitor Housing Needs
- Designed for Use with Standard Bently Nevada Monitoring Systems and 3300 XL Equipment
The 330880-28-15-048-00-02 serves as the PROXPAC XL Proximity Transducer Assembly in industrial machinery monitoring applications, providing reliable displacement measurement for rotating equipment within the system. It continuously detects shaft vibration and position using the 3300 XL 8 mm probe with 4.8-inch penetration depth and converts mechanical motion into electrical signals for distribution to connected monitors. Seamless signal transmission is standard with the 330880-28-15-048-00-02, however using the optional 1.5-inch (38 mm) Standoff Adapter will allow flexible installation in deep penetration applications requiring extended reach into machinery housings. The 330880-28-15-048-00-02 has made improvements in several areas over previous probe housing designs in addition to incorporating advanced PPS thermoplastic construction within the Bently Nevada product line.
The 330880-28-15-048-00-02 provides essential proximity sensing functions critical to machinery protection systems, and is a vital component of the measurement path, directly affecting the accuracy and reliability of vibration data collection. One 330880-28-15-048-00-02 assembly is required per measurement point depending on the specific monitoring requirements. The 330880-28-15-048-00-02 features a 3/4-14 NPT mounting thread and is always installed with the standoff adapter option when ordering the extended penetration configuration.
For severe environment applications, the 330880-28-15-048-00-02 PROXPAC XL Proximity Transducer incorporates Polyphenylene Sulfide (PPS) housing material with glass and conductive fiber reinforcement. In addition to standard single probe operation, the robust configuration also performs effective electrostatic charge dissipation. The 330880-28-15-048-00-02 dual protection design executes environmental sealing using the Type 4X and IP66 ratings specified in the housing specifications. Using this method, the thermoplastic housing continually withstands harsh industrial conditions. If the system encounters severe environmental exposure, the 330880-28-15-048-00-02 will maintain structural integrity and measurement accuracy while providing extra protection compared to traditional steel and aluminum housings.
The 330880-28-15-048-00-02 Bently Nevada PROXPAC XL Proximity Transducer may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330880-28-15-048-00-02 PROXPAC XL Proximity Transducer Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330880-28-15-048-00-02 PROXPAC XL Proximity Transducer Specs
General
- Manufacturer Bently Nevada
- Model 330880-28-15-048-00-02
- Condition New Original ready stock
- Product Family 330880-28-15-048-00-00,330880-28-15-048-00-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Radial Vibration & Position: Monitoring the displacement of shafts in fluid-filmed bearing machines.
- Axial (Thrust) Position: Tracking the longitudinal movement of rotors to prevent catastrophic contact between rotating and stationary parts.
- Tachometer & Phase Reference: Serving as a Keyphasor signal source for speed and phase measurements.
- Harsh Environments: Its PPS (Polyphenylene Sulfide) thermoplastic housing and stainless steel components make it ideal for sites with high moisture or corrosive elements where traditional housings might fail.
- The integrated design eliminates the need for an extension cable between the probe and sensor, simplifying field wiring.
- Output Signal: Provides a clear linear output with a scale factor of 7.87 V/mm (200 mV/mil).
- Field Wiring: Supports connections using 16 to 24 AWG (0.2 to 1.5 mm²) wire, with a recommended maximum distance of 305 meters (1,000 feet) to a monitor.
- Power Requirements: Operates on -17.5 Vdc to -26 Vdc at a maximum of 12 mA.
- Physical Ports: This configuration features 3/4-14 NPT mounting threads and typically uses gold-plated brass ClickLoc connectors for secure, vibration-resistant electrical connections.
- Environmental Ratings: The housing is rated IP66 (ingress protection) and Type 4X, ensuring resistance to hose-directed water and dust.
- Hazardous Area Approvals: The "-28" option denotes a probe with Multiple Approvals (such as BASEEFA/ATEX, CSA, and IECEx) for use in explosive atmospheres.
- Impact & Durability: Certified to withstand 4 Joule impacts at extreme temperatures (-39°C to 115°C) and supports mechanical lateral loads up to 912 N (205 lbf).
- Standard Compliance: Fully complies with API 670 Standard for mechanical configuration and accuracy in vibration monitoring systems.