- 230 VAC single-phase centrifugal blower with an M2E068-DF motor
- 50/60 Hz operation with continuous S1 duty
- Sheet-steel impeller, galvanized housing and ball-bearing motor construction
G2E140-PI51-09 is an ebm-papst single-phase AC centrifugal blower designed for integration into customer-built air-conveying equipment.
The blower combines a scroll housing, clockwise-rotating impeller, connector cable, motor capacitor and winding-mounted thermal overload protector for continuous air movement.
Before installation or replacement, verify the complete model, supply frequency, ambient-temperature limit, mounting orientation, capacitor rating, protective-earth connection, thermal-protector wiring and mechanical guarding.
Availability, condition, price, and shipping time for G2E140-PI51-09 are confirmed during quotation.
ebm-papst G2E140-PI51-09 Centrifugal Blower Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Install with the shaft horizontal or with the rotor positioned at the bottom.
- A rotor-up mounting position requires prior confirmation from ebm-papst.
- Use strength-class 8.8 mounting screws, secure them against loosening and keep the rotor-side drainage holes clear.
- Connect the winding-mounted thermal overload protector to an external control circuit that prevents automatic restart after a trip.
- Connect and verify the protective earth before applying power to this Class I device.
- Supply the blower only through a circuit equipped with an all-pole disconnection switch.
- Inspect the guard, impeller, housing, cables, protective-earth terminal, drainage holes and bearing noise at least every six months.
- Do not use high-pressure water, acids, alkalis, solvents or sharp-edged tools for cleaning.
- The maintenance-free ball bearings use lifetime lubrication designed for 40,000 operating hours.
- Cooling ABB ACS880-604 brake-chopper assemblies using NBRA-658 modules
- Cooling ABB ACS880-604 brake-chopper assemblies using NBRA-659 modules
- Cooling ABB ACS880-604 brake-chopper assemblies using NBRA-669 modules