- The WIOC connects compatible WirelessHART field links to a DeltaV control network
- Copper or fiber Ethernet I/O-port options support the documented network architectures
- The card uses dedicated WIOC carrier and terminal hardware with D2 keying
KL2102X1-BA1 is an Emerson Wireless I/O Card designed for the DeltaV Wireless I/O platform.
It coordinates compatible WirelessHART field links through redundant-capable WIOC hardware and the selected copper or fiber Ethernet I/O-port pair.
Before installation or replacement, verify the complete catalog number, WIOC carrier and terminal block, D2 keying, controller and DeltaV version, I/O-port media, field-link models, network topology, and power wiring.
Availability, condition, price, and shipping time for KL2102X1-BA1 are confirmed during quotation.
Emerson KL2102X1-BA1 Wireless I/O Card Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- KL1601X1-BA1 provides the documented copper Ethernet I/O-port option
- KL1602X1-BA1 provides the fiber Ethernet I/O-port option for supported systems
- The fiber I/O-port option requires DeltaV v12.3 or later and is not cascadeable
- KL4102X1-BA1 is the documented two-wide WIOC carrier
- KL4302X1-CA2 is the documented redundant terminal block
- The exact WIOC card certificate specifies terminal key position D2
- Electronic Marshalling use is documented from DeltaV v11.3.x
- DeltaV SIS with Electronic Marshalling use is documented from v12.3.x
- MD Plus, MQ, and MX controllers are documented for WIOC use from DeltaV v14.3
- WirelessHART field-device integration in DeltaV process-control systems
- Redundant wireless I/O architectures using compatible WIOC terminal hardware
- Copper- or fiber-connected WirelessHART field-link networks