Features:
- Serial communication interface for DeltaV M-series I/O
- 12 VDC LocalBus operation with D4 terminal-block keying
- IP20 construction with no calibration requirement
KJ3241X1-BA1 links supported serial field equipment to the DeltaV M-series I/O subsystem through the designated serial interface position.
D4 keying provides a hardware identity check between the card and its terminal block, reducing the risk of installing a similar-looking but incorrect I/O card.
Maintenance work should preserve the configured serial parameters, carrier position and field wiring while observing the documented environmental and hazardous-location limits.
For KJ3241X1-BA1 Serial Interface Card sourcing, Apter Power can help confirm the Emerson model, D4 terminal key and installed DeltaV configuration.
Emerson KJ3241X1-BA1 Serial Interface Card Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- System role: Connects supported serial devices to DeltaV M-series I/O.
- Card identity: Use the complete KJ3241X1-BA1 marking.
- Configuration: Preserve the installed serial settings during replacement.
- LocalBus input: 12 VDC at 300 mA.
- Terminal key: D4.
- Installation fit: Confirm the carrier and matching terminal block.
- Ambient range: -40°C to +70°C.
- Humidity: 5% to 95%, non-condensing.
- Protection: IP20 equipment requires a suitable enclosure.
- Maintenance: No calibration or user-serviceable parts.
- Serial device integration: Interfaces supported serial equipment with DeltaV.
- Installed-base maintenance: Replaces an exact labeled card in an engineered M-series position.
- Cabinet service: Supports controlled restoration when keying, settings and wiring are matched.