- DeltaV M-series Traditional I/O assembly with eight HART analog-output channels
- Standard I/O termination block configuration with A4 card keying
- Per-channel system isolation and card-stored calibration information
VE4005S2B1 supplies eight commanded current loops for compatible DeltaV M-series field devices.
The complete assembly depends on the correct carrier, terminal block, keying, field supply, wiring, database assignment, and supported DeltaV software level.
Confirm loop polarity, load resistance, grounding, HART device configuration, and output validation requirements before commissioning.
Availability, condition, price, and shipping time for VE4005S2B1 are confirmed during quotation.
Emerson VE4005S2B1 DeltaV HART Analog Output Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- VE4005S2B1 uses the documented standard I/O termination block
- VE4035S2B1 is the separate redundant standard-termination ordering option
- VE4005S2B2 and VE4005S2B3 identify fused and 16-pin mass-termination alternatives
- Supported with DeltaV M-series horizontal and VerticalPlus carrier architecture
- M-series horizontal carriers are not physically compatible with S-series horizontal carriers
- The documented VE4005S2B1 configuration requires DeltaV version 10.3.1 or later
- Restore the approved channel database and HART device definitions
- Check current-loop polarity, field supply, load resistance, and grounding
- Validate commanded current and HART communication on every enabled channel
- Driving eight 4–20 mA final-control or indication loops from DeltaV M-series I/O
- Supporting HART communication with compatible field devices on the configured output channels
- Maintaining standard-termination DeltaV installations that specify the VE4005S2B1 order code