Features:
- Controller-facing CHARM I/O Card for DeltaV Electronic Marshalling.
- 24 VDC input and 6.3 VDC output power ratings.
- Supports the CHARM I/O subsystem rather than a single field channel.
This listing identifies complete Emerson model
KL2101X1-BA1 as DeltaV CHARM I/O Card (CIOC).
Controller interface for a DeltaV Electronic Marshalling CHARM I/O subsystem. Simplex or redundant CIOC architecture selected by the system design.
KL2101X1-BA1 is the CIOC for DeltaV Electronic Marshalling, not an individual signal-type CHARM. Input is 24 VDC at 2 A maximum.
Availability: Contact Apter Power to confirm quotation and sourcing status for the complete model.
- Providing the controller-facing interface for a DeltaV Electronic Marshalling CHARM I/O subsystem.
- Supporting a simplex or redundant CIOC architecture selected in the approved system design.
- Replacing a KL2101X1-BA1 card while preserving the carrier, CHARM population, and address layout.
- Provides the communication path between installed CHARM channels and the DeltaV control system.
- Subsystem communication follows the documented CIOC carrier and simplex or redundant hardware architecture.
- Confirm the installed DeltaV release and control-network arrangement before commissioning the replacement CIOC.
- Supply 24 VDC input power without exceeding the documented 2 A maximum rating.
- Match KL2101X1-BA1 to the correct CIOC carrier and selected redundancy arrangement.
- Verify the CHARM population, channel assignments, and carrier layout before returning the subsystem to service.
- The CIOC is documented for ambient operation from -40 to +70 degrees C.
- KL2101X1-BA1 supports 5 to 95 percent relative humidity under non-condensing conditions.
- The specification cites ISA-S71.04-1985 Class G3 resistance to airborne contaminants.