Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
  • Lifecycle status

    Active / Available from OEM
    Apter Power supports A5 keying and 48-pin mass-termination checks for VE4005S2B5.

VE4005S2B5

/ 4.9
1001 reviews | Need a Specific Revision?
Emerson VE4005S2B5 is a 16-channel 4-20 ma hart analog output plus card with 48-pin mass termination block for DeltaV M-series Traditional I/O.
In Stock
Ships by Wednesday, October 28
Fast Shipping Available
Get a quick price for VE4005S2B5
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for VE4005S2B5

  • Manufacturer:
    Emerson
  • Part Number:
    VE4005S2B5
  • Product Family:
    DeltaV
  • Product Type:
    16-Channel 4-20 mA HART Analog Output Plus Card with 48-Pin Mass Termination Block
  • Stock:
    1
  • Number of Channels:
    16
  • Device Type:
    4 to 20 mA
  • Full Signal Range:
    1 to 23 mA
  • Card Keying:
    A5
  • Accuracy:
    0.25% of span over temperature range
  • Resolution:
    14-bit A/D converter
  • LocalBus Current - Simplex:
    85 mA typical; 150 mA maximum at 12 V DC
  • LocalBus Current - Redundant:
    110 mA typical; 260 mA maximum
  • Field Circuit Power:
    400 mA maximum at 24 V DC (+/-10%)
  • Isolation:
    1000 V DC factory test
  • HART Support:
    Pass-through for AMS Device Manager; variables and status for control
  • HART Scan Time:
    600 to 800 ms typical per enabled channel
  • Minimum DeltaV Version:
    v13.3.1
  • Termination Block:
    48-pin AO mass termination block for Series 2 Plus
  • Operating Temperature:
    -40 to 70 °C
  • Storage Temperature:
    -40 to 85 °C
  • Relative Humidity:
    5 to 95%, non-condensing
  • Airborne Contaminants:
    ISA-S71.04-1985 Class G3; conformal coating
  • Protection Rating:
    IP20
  • Shock:
    10 g half-sine wave for 11 ms
  • Vibration:
    1 mm peak-to-peak from 5 to 16 Hz; 0.5 g from 16 to 150 Hz
  • System Controllers:
    MQ, MX, or PK controllers
  • Supported Carriers:
    M-series horizontal or VerticalPlus carriers
  • Estimated shipping dimensions:
    Product dimensions: 10.7 x 4.1 x 10.5 cm (H x W x D).
  • Tariff Code:
    Please confirm the destination before shipping
  • Country of origin:
    USA
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Specifications Output Review Interface Review System Matching

Features:

  • Sixteen HART outputs: The Plus card provides sixteen 4-20 mA channels with HART pass-through.
  • 14-bit output resolution: The documented full signal range is 1 to 23 mA with 0.25% span accuracy.
  • Series 2 Plus termination: The exact order code uses a 48-pin ao mass termination block for series 2 plus.

VE4005S2B5 is an order-specific DeltaV M-series I/O assembly combining the documented card function with the listed termination block.

Engineering review should match the signal type, channel count, card keying, terminal block, controller, carrier, and required DeltaV software level.

Procurement should compare the complete VE4005S2B5 code with the installed label because adjacent table rows describe materially different termination options.

Availability is subject to Apter Power's current inventory and sourcing confirmation.

Emerson VE4005S2B5 Manuals, Datasheets, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Emerson VE4005S2B5 16-Channel 4-20 mA HART Analog Output Plus Card with 48-Pin Mass Termination Block Specs

General

  • ManufacturerEmerson
  • ModelVE4005S2B5
  • ConditionNew and factory sealed
  • Product FamilyDeltaV M-series Traditional I/O

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

  • Channel count: Match sixteen 4-20 mA HART output loops.
  • Full range: The documented full signal range is 1 to 23 mA.
  • Accuracy: The official accuracy is 0.25% of span over temperature.
  • Resolution: The Plus card uses 14-bit conversion.
  • HART support: HART pass-through is supported for AMS Device Manager.
  • Isolation: Each channel is isolated from the system and tested to 1000 V DC.
  • Termination: Use the documented 48-pin ao mass termination block for series 2 plus.
  • Version: Traditional I/O Plus cards require DeltaV v13.3.1 or higher.
  • Card key: Match A5 keying before insertion.
  • Carrier: Use an M-series horizontal or VerticalPlus carrier.
  • Controller: Confirm an MQ, MX, or PK controller environment.
  • Identity: Verify VE4005S2B5 on the label and procurement record.
Description

The VE4005S2B5 is an Emerson 16-channel 4-20 ma hart analog output plus card with 48-pin mass termination block in the DeltaV M-series Traditional I/O family.

VE4005S2B5 provides sixteen isolated 4-20 mA HART analog output channels for the DeltaV M-series Series 2 Plus architecture.

Before ordering VE4005S2B5, confirm the 16-channel Plus card, A5 keying, 48-pin ao mass termination block for series 2 plus, v13.3.1 or higher software, and full code.

Alternative Names
Emerson VE4005S2B5 EMR VE4005S2B5 VE4005S2B5 VE4005-S2-B5 VE4005 S2 B5 DeltaV VE4005S2B5 VE4005S2B5 16-channel HART analog output Plus interface Emerson DeltaV VE4005S2B5
Technical notes
Emerson VE4005S2B5 uses 48-pin ao mass termination block for series 2 plus in the DeltaV M-series Traditional I/O platform. Confirm the 16-channel Plus card, A5 keying, 48-pin ao mass termination block for series 2 plus, v13.3.1 or higher software, and full code.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
What is Emerson VE4005S2B5 used for?
It provides sixteen isolated 4-20 mA HART analog output channels for the DeltaV M-series Series 2 Plus architecture. Verify the complete model before ordering.
Which product family includes VE4005S2B5?
VE4005S2B5 is listed in the Emerson DeltaV M-series Traditional I/O product data sheet.
How should VE4005S2B5 be verified before ordering?
Check confirm the 16-channel Plus card, A5 keying, 48-pin ao mass termination block for series 2 plus, v13.3.1 or higher software, and full code.
Which termination applies to VE4005S2B5?
Emerson lists 48-pin ao mass termination block for series 2 plus for the exact VE4005S2B5 order code.
Is VE4005S2B5 active or discontinued?
The current March 2026 Emerson product data sheet lists VE4005S2B5 and does not state that it is discontinued.
Is an official replacement documented for VE4005S2B5?
No replacement is identified in the reviewed Emerson PDS. Do not treat an adjacent order code as interchangeable without engineering review.
Where can I get the VE4005S2B5 datasheet and request a quote?
After upload, the Manuals tab will contain the Apter-hosted datasheet. Send the required quantity, destination, and delivery target to Apter Power.

Product Browsing History