Features:
- European cord option: P3 identifies the regional mains lead included with this ordering variant.
- Twenty-four copper ports: A single rack unit concentrates a large set of 10/100BASE-TX device connections.
- Separate backbone choices: Copper uplinks and transceiver slots support a deliberate choice of uplink media.
VE6046P3 is selected when the DeltaV Smart 24-port switch must arrive with the European cord option.
The P3 suffix changes the supplied cord scope, while the managed port architecture remains the same as the related VE6046 switch variants.
Receiving should identify the cord, transceivers, setup cable and saved configuration as separate acceptance items.
Apter Power can help confirm the Emerson VE6046P3 DeltaV Smart 24-Port Switch, European cord option and required uplink accessories before quotation.
Emerson VE6046P3 DeltaV Smart 24-Port Switch with European Power Cord Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Dense device layer: Twenty-four copper ports gather network devices into one managed cabinet switch.
- Uplink separation: Two copper uplinks keep backbone connections distinct from the access-port map.
- Media expansion: Two VE6050 slots support selected optical or alternate uplink media.
- Managed recovery: Port settings and network identity are restored from a controlled configuration rather than rebuilt during the outage.
- P3 identity: This complete model denotes the European power-cord ordering option.
- Receiving control: The included lead is inspected against the purchase scope before installation.
- Site-power boundary: Regional cord style does not replace verification of cabinet voltage and inlet.
- Variant discipline: Similar P1 and P4 switch codes remain separate procurement records.
- Port-map capture: Existing cable labels and switch-port assignments are preserved before removal.
- Backbone readiness: Uplink connectors and transceiver types are staged before production traffic is moved.
- Configuration access: The separately ordered setup cable or another supported access method is available on site.
- Acceptance checks: Management reachability, uplink health and required device links are proven after replacement.
- Control-network cabinets: Aggregates DeltaV controllers, servers and supported Ethernet devices.
- European installations: Aligns the base switch order with a documented European regional cord requirement.
- Fiber-backed access: Optional transceivers connect copper device groups to a selected fiber backbone.
- Managed spare strategy: Supports prepared replacements where configuration and port maps are maintained with the spare.