Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
  • Lifecycle status

    Active / Available from OEM
    Apter Power supports quotations, code verification, documents, and sensor-converter matching.

PR6423/002-000 CON021

/ 4.9
1001 reviews | Need a Specific Revision?
Emerson PR6423/002-000 CON021 is an 8 mm eddy current sensor configuration with M10 x 1 thread, 4 m total cable, LEMO termination, and a CON021 signal converter.
In Stock
Ships by Thursday, October 29
Fast Shipping Available
Get a quick price for PR6423/002-000 CON021
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for PR6423/002-000 CON021

  • Manufacturer:
    Emerson
  • Part Number:
    PR6423/002-000 CON021
  • Product Family:
    Epro
  • Product Type:
    Eddy Current Sensor with Signal Converter
  • Stock:
    1
  • Thread:
    M10 x 1
  • Cable Configuration:
    4 m total cable
  • Cable Termination:
    LEMO
  • Nominal Sensitivity:
    8 V/mm
  • Static Measuring Range:
    ±1 mm
  • Dynamic Measuring Range:
    0 to 500 µm
  • Converter Frequency Range:
    0 to 20 kHz
  • Converter Rise Time:
    Less than 15 µs
  • Converter Protection:
    IP20
  • Weight:
    0.42 kg
  • Estimated shipping dimensions:
    24.5 x 17 x 4 cm
  • Tariff Code:
    Please confirm the destination before shipping
  • Country of origin:
    Germany
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Specifications Sensor Code Converter Match Gap Setup

Features:

  • Matched measurement chain: The PR6423 sensor is used with a compatible CON021 converter.
  • Four-metre LEMO configuration: The /002-000 code defines this cable and connector arrangement.
  • Non-contact shaft measurement: The system measures displacement or vibration on a suitable ferromagnetic target.

PR6423/002-000 CON021 combines an 8 mm Epro eddy current sensor with the matching signal-converter family for non-contact shaft measurement.

The /002-000 sensor code specifies M10 x 1 thread, a 45 mm body, four-metre total cable, and LEMO termination.

Before ordering, verify the complete code, converter identity, mounting thread, target material, initial gap, cable route, and monitor input requirements.

Availability is subject to Apter Power's current inventory and sourcing confirmation.

PR6423/002-000 CON021 Manuals, Datasheets, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

PR6423/002-000 CON021 Eddy Current Sensor with Signal Converter Specs

General

  • ManufacturerEmerson
  • ModelPR6423/002-000 CON021
  • ConditionNew Original ready stock
  • Product FamilyEpro PR6423 / CON021

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

PR6423 configuration review

  • Thread: Confirm M10 x 1 at the mounting point.
  • Body length: Check the documented 45 mm sensor body.
  • Cable length: Retain the four-metre total cable configuration.
  • Termination: Confirm LEMO at the converter interface.

CON021 interface checks

  • Pairing: Keep the sensor and converter as a verified measurement chain.
  • Signal path: Confirm the monitor input and cable routing.
  • Environment: Review converter temperature and IP20 enclosure needs.
  • Calibration: Do not mix unmatched components by appearance.

Commissioning review

  • Target: Use the documented ferromagnetic target requirements.
  • Initial gap: Set and verify the installation gap under the manufacturer procedure.
  • Runout: Record target condition and mechanical runout.
  • Acceptance: Confirm the complete loop response before service.
Description
The Emerson PR6423/002-000 CON021 is an 8 mm eddy current sensor configuration with M10 x 1 thread, 4 m total cable, LEMO termination, and a CON021 signal converter.

Official manufacturer information identifies PR6423/002-000 CON021 for this configuration. The sensor-converter pair supports non-contact shaft displacement and vibration measurement on ferromagnetic targets.

Before ordering PR6423/002-000 CON021, verify the exact sensor code, cable routing, converter pairing, target material, mounting gap, and monitoring-system interface.
Alternative Names
PR6423/002-000 CON021 PR6423/002-000 Emerson PR6423/002-000 CON021 CON021 PR6423002000CON021 PR6423-002-000 CON021 Epro PR6423/002-000 CON021 PR6423/002-000 Eddy Current Sensor with Signal Converter
Technical notes
Emerson PR6423/002-000 CON021 is an 8 mm eddy current sensor configuration with M10 x 1 thread, 4 m total cable, LEMO termination, and a CON021 signal converter. Verify the complete identity and installed system configuration before procurement.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
What must be verified before ordering PR6423/002-000 CON021?
Check the full sensor code, M10 x 1 thread, four-metre cable, LEMO connection, converter, target, and monitor interface.
Can PR6423/002-000 CON021 components be mixed with visually similar probes?
No. Sensor, cable configuration, converter, target calibration, and monitor interface must be confirmed as a system.
Which installation records help source PR6423/002-000 CON021?
Provide the sensor and converter nameplates, mounting drawing, cable route, initial gap, target material, and monitor channel.
Why does the complete PR6423/002-000 code matter?
It defines the mounting thread, body configuration, total cable length, and connector needed for the installed arrangement.
What should engineers check after installing PR6423/002-000 CON021?
Verify mounting, target condition, initial gap, cable security, converter output, alarm logic, and loop response.
Can CON021 be approved without checking the connected PR6423 sensor?
No. The converter must be reviewed with the exact sensor configuration and monitoring-system input.
What should procurement include in a PR6423/002-000 CON021 RFQ?
Include both nameplates, required quantity, condition, destination, documentation need, and requested delivery date.

Product Browsing History