Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with PR6424/000-010

All in stock · Add one and it is quoted together with the model, one shipping cost.

PR6424/000-010

Emerson EPRO PR6424/000-010 is a 16 mm M18×1.5 eddy-current sensor with a 40 mm body, 5 m cable and LEMO end.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for PR6424/000-010

PR6424/000-010Emerson 16 mm Eddy Current Sensor
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
Emerson
Part Number
PR6424/000-010
Product Family
Epro
Product Type
16 mm Eddy Current Sensor
Stock
1
Weight
0.3 kg
Estimated shipping dimensions
16x14x4cm
Tariff Code
Please confirm the destination before shipping
Country of origin
Germany
Place of shipment
Xiamen,Fujian,China

More information

Features:

  • 16 mm sensing system: supports non-contact shaft displacement measurement with compatible electronics
  • M18 × 1.5 body: provides the documented threaded mounting interface
  • Five-metre lead: uses an unarmored integral cable with LEMO termination
Target response: The 16 mm eddy-current probe is calibrated for specified ferromagnetic target conditions, so shaft material and minimum diameter directly influence the usable linear range and measurement accuracy.

Mechanical placement: The M18 × 1.5 threaded body lets the probe be positioned and locked at the required gap; available reach and surrounding clearance determine whether that gap remains stable.

Cable-chain value: The five-metre integral lead forms part of the sensor's electrical chain and ends in a LEMO connection, making cable routing and converter selection part of the measurement configuration.

Apter Power supports Emerson PR6424/000-010 16 mm Eddy Current Sensor documentation, quotations and sensor-chain guidance.
Emerson PR6424/000-010 16 mm Eddy Current Sensor Manuals,Datasheets,Link
Important Notice: The internal resources support product identification, engineering review and safe installation.
  • Thread: Use the M18 × 1.5 mounting interface without cross-threading.
  • Body length: Allow clearance for the 40 mm sensor configuration.
  • Cable protection: Protect the unarmored integral lead from abrasion and strain.
  • Connector: Keep the LEMO contact clean and fully seated.
  • Integral length: Include the full 5 m lead in the documented transducer chain.
  • Routing: Separate the cable from high-energy conductors and sharp edges.
  • Strain relief: Support the lead without loading the sensor body.
  • Continuity: Inspect the connector and cable before changing calibration.
  • Target material: Use the documented 42CrMo4 calibration basis.
  • Shaft size: Confirm the minimum shaft diameter for the 16 mm sensor.
  • Static setup: Set gap from the specified converter response rather than visual clearance alone.
  • Shaft vibration: Measure dynamic radial motion on compatible rotating machinery.
  • Shaft position: Monitor static displacement within the transducer range.
  • Machine protection: Feed the documented converter and monitoring system.
  • Commissioning: Establish gap and signal response during controlled machine setup.

Description

Configured for large-shaft non-contact measurement, PR6424/000-010 is a 16 mm eddy-current sensor with an M18 × 1.5 thread, unarmored cable and 40 mm sensor-body length. The code specifies an adaptor plug, 5 m cable and LEMO termination.

In an engineered transducer chain, PR6424/000-010 works with the documented signal converter and a suitable 42CrMo4 target. Gap, shaft diameter, cable routing and the complete electrical chain must be checked together before calibration.

For machinery monitoring work, Apter Power can support PR6424/000-010 documentation, quotations and sensor-chain review using the installed converter and target details.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

Miya
ChinaQuality Inspection & Traceability

ISO 9001:2015 Quality Management Certification

Review the ISO 9001:2015 certificate for Apter Power, its certified scope, certificate number, validity, process-control purpose and the limits of management-system certification.

ISO 9001Certified quality system
TraceableDocumented order records
“ Certification matters only when the process is visible in everyday work—from the first requirement review to the final release. — Miya ”
Miya · China · August 2026
Read the full case study
Leonia
IndiaSiemens SIMATIC S7-400 PS 407 · 6ES7407-0DA01-0AA0

Siemens PS 407 Verified for an Indian Textile Plant

An Indian textile manufacturer asked Apter Power to verify Siemens SIMATIC S7-400 PS 407 module 6ES7407-0DA01-0AA0 by complete catalogue number, visible condition and packaging evidence before the next supply decision.

24/7Textile plant support
100%Inspected for Original & New product
“ Apter made our first overseas purchase of Siemens S7-1200 spares straightforward, with clear model confirmation and delivery arrangements. — Singh ”
Leonia · India · 9 October 2026
Read the full case study
Yuki
USA11 Emerson DeltaV models

11 Emerson DeltaV Models Secured and Inspected for an American Natural Gas Project

See how Apter Power secured 11 new and unused Emerson DeltaV models, supported independent powered inspection and delivered the order for an American natural gas project.

11DeltaV models secured
6 daysFull order prepared
“ Apter secured all our DeltaV models and supported independent inspection before we paid the balance. — Mohanad ”
Yuki · USA · May 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

What configuration is identified by PR6424/000-010?

It identifies a 16 mm eddy-current probe with M18 × 1.5 mounting, a 40 mm sensor body, an unarmored 5 m integral lead and LEMO termination.

How should the operating gap be established for PR6424/000-010?

Set the static operating point with the complete compatible converter and the actual target rather than relying on visual clearance. Leave enough margin for the expected shaft movement to remain inside the documented range.

Why do shaft material and diameter matter for PR6424/000-010?

Eddy-current sensitivity depends on target conductivity and geometry. A different material, diameter or surface condition can change the response even when the mechanical gap is copied.

What does a stable but offset signal from PR6424/000-010 usually indicate?

A stable offset commonly reflects a changed gap or target condition rather than electrical noise. Reconfirm the target basis and establish the static baseline before treating the sensor as defective.

How can electrical instability be separated from actual shaft motion?

Compare the output with the shaft stopped. Instability at standstill points first to the cable, LEMO connector, grounding, converter supply or a moving mount rather than true machine motion.

Can the integral lead of PR6424/000-010 be shortened, spliced or repaired generically?

Do not shorten or splice the integral lead. Its length and construction belong to the measured chain, so cable damage requires evaluation or replacement of the documented sensor configuration.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

PR6423/010-040 CON021
Emerson PR6423/010-040 CON021 combines a short armored M10×1 sensor, 10 m LEMO lead and panel converter.
In stock
PR6423/003-130 CON021
The Emerson PR6423/003-130 CON021 is a signal converter for eddy current sensors, supporting 0-20,000Hz frequency range with -23V to -32V supply.
In stock
PR9268/017-100
Emerson PR9268/017-100 is an omnidirectional absolute-vibration transducer for service up to 100°C, supplied with a 10 m non-armored cable and open cable end.
In stock
PR9350-02
Emerson PR9350-02 is a contact LVDT linear displacement transducer with a ±25 mm measuring range, 270 mV/V sensitivity and a three-pole Cannon connector.
In stock
EZ1900-003-ADAP-1
Emerson EZ1900-003-ADAP-1 is a 0.35 m adapter for connecting specified PR642x probes to an AMS EZ 1000 converter.
In stock
MMS6410
EPRO MMS6410 is a dual-channel measuring amplifier for inductive displacement sensors, including documented PR9350 LVDT applications.
In stock
PR6424/000-101 CON031
Emerson PR6424/000-101 CON031 is a 16 mm PR6424 eddy-current probe configuration paired with a CON031 signal converter for non-contact shaft displacement measurement. Use the complete order code when matching a replacement.
In stock
EZ1900-045
Emerson EZ1900-045 is a 4.5 m unarmored extension cable for the documented 5 mm AMS EZ eddy-current sensor chain.
In stock
PR6423/13R-030 CON021
Emerson PR6423/13R-030 CON021 combines an armored 3/8-24 UNF reverse-mount sensor, 8 m LEMO lead and CON021 panel converter.
In stock
PR6424/000-000 CON021
Emerson PR6424/000-000 CON021 combines a 52.5 mm M18×1.5 unarmored 16 mm sensor, adapter, 4 m LEMO lead and CON021 converter.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat