Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with IC697MDL240

  • IC697BEM731 Genius I/O Bus Controller Module
  • IC697CPX782 Series 90-70 96 MHz CPU with 1 Mbyte memory
  • IC697CPU780 16 MHz Hot-Standby CPU

All in stock · Add one and it is quoted together with the model, one shipping cost.

IC697MDL240

GE IC697MDL240 accepts sixteen independently isolated 120 VAC field inputs, allowing separate points to monitor circuits that do not share one neutral or phase.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for IC697MDL240

IC697MDL240General Electric 120 VAC Isolated 16-Point Input Module
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
General Electric
Part Number
IC697MDL240
Product Family
GE 90-70 Series PLC
Product Type
120 VAC Isolated 16-Point Input Module
Stock
1
Tariff Code
8538900000
Country of origin
USA
Place of shipment
Xiamen, Fujian, China

More information

  • Sixteen independently isolated 120 VAC inputs
  • Twenty-millisecond filtering for stable field-state acquisition
  • Detachable terminal board with channel status LEDs

IC697MDL240 is a Series 90-70 input module designed for applications where sixteen 120 VAC field signals require individual electrical isolation rather than a shared group common.

Each channel has separate hot and neutral connections, allowing the module to monitor field contacts supplied by different phases or independently protected circuits. Its reactive input design also supports compatible two-wire and three-wire proximity switches.

A typical 20 ms input filter helps reject short electrical disturbances, while front status LEDs support channel diagnosis. Before replacement, verify the complete hardware suffix, terminal assignments, slot keying, sensor leakage, and any required insulating-strip arrangement.

Availability, condition, price, and shipping time for IC697MDL240 are confirmed during quotation.

General Electric IC697MDL240 120 VAC Isolated 16-Point Input Module Manuals, Datasheets, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

  • Map every channel hot and neutral conductor
  • Check two-wire sensor leakage against the off-state limit
  • Preserve the keyed rack position and terminal-board identity
  • Read the complete suffix from the module label
  • Inspect pre-D hardware for the required insulating strip
  • Compare adjacent modules for metal faceplates
  • Operate each field device under controlled conditions
  • Compare front LEDs with PLC input references
  • Review faults before enabling automatic operation
  • Individually isolated 120 VAC limit-switch monitoring
  • Mixed-phase field contact acquisition
  • Replacement in an installed Series 90-70 rack

Description

IC697MDL240 converts sixteen 120 VAC field states into Series 90-70 logic references. Every channel has its own neutral connection and is isolated from the other fifteen channels.

Reactive input circuitry limits heat while remaining compatible with documented two-wire and three-wire proximity switches. The 20 ms input filter rejects short disturbances before they reach the PLC image.

The detachable terminal board, channel LEDs and mechanical slot key support controlled replacement. Each field circuit must still be proven against its assigned reference after wiring is restored.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

Jim
ChinaSGS inspection

SGS Verification for Global Automation Procurement

Documented third-party inspection helps procurement teams evaluate supplier processes, product conformity and pre-shipment evidence before cross-border automation orders move forward.

SGS ReviewIndependent evidence
4 StepsClear verification process
“ Verification should show what was checked and how it matches the buyer’s requirements. — Jim ”
Jim · China · 2026
Read the full case study
May
UAEGE IS200VVIBH1C

Evidence Before Delivery

A Dubai power-project customer visited Apter Power in Xiamen to inspect GE turbine-control cards, labels, packaging and visible condition before delivery.

On siteCustomer inspection in Xiamen
Pre-deliveryIdentity & condition reviewed
“ Seeing the products, labels and inspection process in person gave us a clearer understanding of Apter Power's quality control. — Muhammad ”
May · UAE · October 2026
Read the full case study
Miya
ChinaQuality Inspection & Traceability

ISO 9001:2015 Quality Management Certification

Review the ISO 9001:2015 certificate for Apter Power, its certified scope, certificate number, validity, process-control purpose and the limits of management-system certification.

ISO 9001Certified quality system
TraceableDocumented order records
“ Certification matters only when the process is visible in everyday work—from the first requirement review to the final release. — Miya ”
Miya · China · August 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

Can GE IC697MDL240 monitor inputs from different AC phases?

Yes. Every channel is individually isolated, but each point must retain its own hot and neutral pair and site clearances must still satisfy the panel design.

Why can a two-wire sensor keep GE IC697MDL240 input logic on?

Compare the sensor's off-state leakage with the module limit and verify field voltage. Excess leakage or a damaged neutral path can prevent the point from reaching a valid off state.

What must be checked before moving GE IC697MDL240 wiring to a spare?

Photograph terminal numbers, neutral assignments, slot key and PLC references, then confirm that the detachable terminal board belongs to the same rack position before tightening it.

Does GE IC697MDL240 revision matter beside a metal-faceplate module?

Yes. GE documentation calls for an insulating strip on versions earlier than D when installed immediately to the right of a metal faceplate; inspect the board before energizing.

Can GE IC697MDL240 replace a grouped 120 VAC input module?

Only after an engineering review. Individual isolation changes neutral routing, terminal allocation and fault separation, so a matching voltage alone does not establish compatibility.

How should GE IC697MDL240 be checked when one point never changes?

Measure the field voltage at that channel's hot and neutral terminals, compare its LED with the PLC reference, and then inspect the switch, leakage current and terminal-board contact.

What proves GE IC697MDL240 is ready after installation?

Exercise all sixteen field devices, confirm every LED and PLC reference, verify phase and neutral separation, and review the PLC fault table before returning the machine to automatic control.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

IC697BEM731
GE IC697BEM731 links a Series 90-70 rack to one Genius I/O channel for distributed I/O, peer data and redundant-bus configurations.
In stock
IC697CPX782
IC697CPX782 is a GE Fanuc Series 90-70 96 MHz CPU with 1 Mbyte of battery-backed user memory and three serial ports.
In stock
IC697CPU780
General Electric IC697CPU780 is a 16 MHz, 32-bit floating-point CPU that operates as the primary or secondary controller in a Series 90-70 Hot Standby system.
In stock
IC697CPU781
General Electric IC697CPU781 is a 16 MHz Series 90-70 CPU for real-time machine, process, and material-handling control with expandable battery-backed memory.
In stock
IC697CMM711
General Electric IC697CMM711 is a Communications Coprocessor Module that adds two independent serial communication channels to a CPU rack.
In stock
IC697MDL250
GE IC697MDL250 brings thirty-two 120 VAC input points into a Series 90-70 rack through four electrically isolated groups of eight channels.
In stock
IC697MDL650
General Electric IC697MDL650 is a 24 VDC 32-Point Positive-Logic Input Module that reports grouped 24 VDC sourcing-device states to Series 90-70 logic.
In stock
IC697CHS750
GE IC697CHS750 is a five-slot rear-mount Series 90-70 rack with a dedicated power-supply position and VME C.1 backplane.
In stock
IC697CPU731
GE IC697CPU731 is a single-slot 12 MHz Series 90-70 processor for real-time machine, process and material-handling control.
In stock
IC697MDL350
GE IC697MDL350 switches thirty-two 120 VAC loads in four isolated, fused groups designed for contactors, solenoids, indicators and other inrush-bearing devices.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat