Features:
- Configures eight channels independently for thermocouple or millivolt measurement.
- Supports J, K, T, E, S, R, B, N, G, C, D, and Platinel II thermocouples.
- Combines selectable cold-junction compensation with open-sensor and limit diagnostics.
IC670ALG630 exchanges eight analog input words with the Field Control Bus Interface Unit, while optional status and control data support channel diagnostics.
Thermocouple linearization and six millivolt spans let individual channels handle different temperature sensors or low-level voltage sources in one station.
Cold-junction compensation can be selected as local, remote, fixed, or disabled, and line-frequency filtering determines the per-channel scan interval.
The General Electric IC670ALG630 8-Channel Thermocouple Analog Input Module may still be available for purchase and support from Apter Power beyond End-of-Life (EOL) by the manufacturer (OEM).
General Electric IC670ALG630 8-Channel Thermocouple Analog Input Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
General Electric IC670ALG630 8-Channel Thermocouple Analog Input Module Specs
General
- ManufacturerGeneral Electric
- ModelIC670ALG630
- ConditionNew Original ready stock
- Product FamilyGE Genius I/O
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Channel Configuration:
- Channel count: 8 independently configurable analog inputs
- Thermocouples: J, K, T, E, S, R, B, N, G, C, D, and Platinel II
- Millivolt ranges: ±19.5, ±39, ±78.125, ±156.25, ±312.5, and ±625 mV
- Conversion: 15-bit magnitude plus sign
Measurement Compensation:
- Cold junction modes: Local, remote, fixed, or disabled
- Line frequency selection: 50 Hz or 60 Hz filtering
- Scan time: 70 ms per point at 50 Hz or 60 ms per point at 60 Hz
- Calibration: Internal self-calibration supports channel accuracy
Monitoring and Limits:
- Sensor fault: Open-thermocouple detection
- Range monitoring: Overrange and underrange reporting
- Alarm limits: Configurable high and low thresholds per channel
- Isolation rating: Up to 250 VAC between channels