Features:
- Provides the HAIC analog-input function within the SPEEDTRONIC Mark IV hardware set.
- Converts incoming analog measurements into values usable by the control electronics.
- Installs as a plug-in DS3800 circuit board in the Mark IV rack architecture.
DS3800HAIC1D belongs to the analog-measurement path of the legacy Mark IV turbine-control platform.
The board accepts the system’s conditioned analog channels and presents converted data to the processor-side hardware.
Its complete HAIC identity and revision suffix should be matched to the existing rack record before installation.
The General Electric DS3800HAIC1D Mark IV Analog Input Board may be available for purchase and technical support through Apter Power.
General Electric DS3800HAIC1D Analog Input Board Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Measurement-Side Function
- Board Identity: HAIC identifies an analog input board in the Mark IV hardware family.
- Signal Purpose: The board handles analog measurements used by the turbine-control electronics.
- Conversion Stage: Input information is converted for use by processor-side functions.
- System Boundary: Relay driving and operator display functions belong to different DS3800 cards.
Platform Placement
- Control Family: The board is associated with SPEEDTRONIC Mark IV.
- Hardware Series: DS3800 denotes the plug-in circuit-board generation.
- Rack Use: HAIC operates as part of the Mark IV card-rack arrangement.
- Functional Match: The installed position must require the HAIC analog-input role.
Part-Number Matching
- Base Code: DS3800 identifies the board-hardware family.
- Function Code: HAIC distinguishes the analog-input design.
- Group Code: The suffix includes the group and revision identifier.
- Record Match: Use the complete DS3800HAIC1D string when comparing the existing board record.
Analog Input Scope
- Field Direction: Measurement information enters the control architecture through the input path.
- Conversion Role: HAIC prepares analog values for processor-side use.
- Functional Separation: Relay outputs and communications are assigned to other DS3800 board types.
- Board Identity: The 1D suffix remains part of the complete analog-input board number.