- Selectable single-ended or differential architecture supports different field-wiring needs
- Software configuration assigns current or voltage operation by channel
- Hot-swap capability supports controlled module service in an RX3i Universal Backplane
IC695ALG608 is a General Electric PACSystems RX3i Analog Input Module for non-isolated current and voltage measurement.
The module can be configured for eight single-ended points or four differential points and applies channel scaling, offsets, alarms, diagnostics, and rate-of-change processing in the RX3i system.
Before installation or replacement, verify the input mode, terminal block, loop wiring, common reference, range, scaling, alarms, filters, interrupt configuration, grounding, shielding, and saved project.
Availability, condition, price, and shipping time for IC695ALG608 are confirmed during quotation.
General Electric IC695ALG608 PACSystems RX3i Analog Input Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Eight single-ended inputs maximize channel count for common-referenced signals
- Four differential inputs provide separate positive and negative measurement connections
- Current and voltage operation is assigned through the RX3i software configuration
- Automatic calibration compensates the module measurement path
- Onboard error checking reports internal and configured channel conditions
- Open-circuit detection can identify supported field-loop wiring faults
- Per-channel scaling and offsets convert raw input values to engineering units
- Configurable alarm limits support channel-specific process monitoring
- Rate-of-change alarms and interrupts can report rapidly changing analog signals
- Acquisition of 0...10 V and ±10 V industrial analog signals
- Monitoring of 0...20 mA and 4...20 mA process transmitters
- Differential voltage or current measurement in PACSystems RX3i control systems