- Three Gigabit Ethernet ports include a two-port switched interface
- MRP and PROFINET System Redundancy support resilient RX3i network architectures
- CFast storage, USB service access, and an available Energy Pack support controller maintenance
IC695CPE330 is a GE PACSystems RX3i CPE330 Programmable Automation Controller for industrial machine and process-control systems.
The controller combines local execution with protocol-rich Ethernet communication, serial connectivity, removable CFast storage, and scalable simplex or redundant remote I/O.
Before installation or replacement, verify the RX3i hardware configuration, firmware, project archive, Ethernet roles, redundancy design, remote I/O count, and Energy Pack connection.
Availability, condition, price, and shipping time for IC695CPE330 are confirmed during quotation.
GE IC695CPE330 CPE330 Programmable Automation Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Ethernet services include SRTP, Modbus TCP/IP, EGD, PROFINET, and OPC UA
- Additional documented services include DNP3 Outstation, IEC 61850 client, IEC 104 server, and HART passthrough
- The serial interface supports ASCII and Modbus RTU
- The controller supports as many as 32 simplex remote I/O devices in the documented standard arrangement
- As many as 20 redundant remote I/O devices are supported
- With PNC001, the documented simplex remote-I/O capacity increases to 255 devices
- Industrial approvals include UKCA, UL, cUL, RoHS, CCC, FCC, and REACH
- Hazardous-location approvals include Class I Division 2 and ATEX Zone 2
- Marine approvals include ABS, BV, LR, and DNV GL
- PACSystems RX3i machine and process control
- PROFINET distributed-I/O control
- Protocol-integrated utility and industrial automation