Features:
- Provides 16 temperature input channels for thermocouple and RTD sensors.
- Performs dedicated temperature acquisition through the module input circuitry.
- Supports configured sensor types and their corresponding field wiring arrangements.
MAI51 combines input type of Thermocouple and RTD, channels of 16, and i/o function of Temperature acquisition in the Nexus OnCore platform.
It acquires sixteen thermocouple or RTD temperature-input channels. This role connects the Nexus OnCore 16-Channel TC/RTD Analog Input Module to the surrounding Nexus OnCore architecture.
Before commissioning, verify thermocouple or RTD sensor compatibility; match the complete MAI51 regional suffix; and provide the required enclosure and grounding.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for General Electric MAI51:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Acquires compatible thermocouple signals for temperature monitoring in Nexus OnCore systems.
- Connects RTD sensors to a sixteen-channel Nexus temperature-input module.
- Supports industrial process-temperature measurement within certified panel-mounted installations.
- Receives nominal 24 VDC operating power from the Nexus OnCore system supply.
- Consumes up to 1.8 W under the specified temperature-input module configuration.
- Combines an onboard processor subsystem with dedicated temperature-signal acquisition circuitry.
- Permits certified ambient operation from -20 to +50 degrees C according to the temperature-input nameplate.
- Shows Class I Division 2 and Zone 2 markings for use in the approved hazardous locations.
- ATEX service requires panel mounting inside an enclosure rated to at least IP54.
- Verify that the selected thermocouple or RTD sensor is compatible with the configured input channel.
- Match the complete regional part-number suffix when selecting the required replacement module.
- Provide the enclosure and grounding arrangements specified for the installed temperature-input assembly.