Features:
- Central Interface Between Safety System Logic and HIMatrix F60 Rack Backplane
- Integrates Complex Safety Processing with SIL 3/PL e Certified Reliability
- Functions Alongside HIMatrix F60 Series I/O Modules and Safety Network Devices
The HIMA F60CPU01 serves as the Central Processing Unit in a HIMatrix F60 rack, delivering high-performance execution of safety-related application programs for all modules within the system. It continuously processes critical safety logic while managing high-speed data communication across the system bus to support real-time operation of all monitors and I/O modules. Seamless logic execution is standard with the F60CPU01, however utilizing an optional Redundant CPU Configuration enables seamless switchover to a backup processor in the event of a primary unit failure. The F60CPU01 incorporates significant improvements over previous processor designs in addition to integrating full functional safety capabilities certified to IEC 61508 and EN ISO 13849-1 standards.
The F60CPU01 provides essential processing functions common to the entire rack, and is a critical component of the safety path, directly affecting the proper, normal operation of the overall safety system. One or two F60CPU01 processors are required per rack depending on the desired redundancy level. The F60CPU01 occupies the designated CPU slot in the rack and is always located in the central processing unit position.
For Dual Redundant Processing applications, the HIMatrix F60 System requires a second F60CPU01 processor module installed in the redundant slot. In addition to standard single processor operation, the redundant configuration also performs automatic switchover. The F60CPU01 dual processor configuration executes failover using the internal diagnostic circuitry specified in the processor options. Using this method, the redundant processing system continually monitors the health of both units. If the system detects that the primary processor is no longer providing stable output (outside configured tolerance levels or experiencing internal faults), it will automatically transfer control to the secondary processor and place an event in the System Event List.
The F60CPU01 HIMA CPU module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
HIMA F60CPU01 CPU module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
HIMA F60CPU01 CPU module Specs
General
- Manufacturer HIMA
- Model F60CPU01
- Condition New Original ready stock
- Product Family F60 PS 01,F60 DI 32 01,F60 DO 8 01,F60 DIO 24 01
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Software Suites: Configuration and programming are managed via HIMA SILworX (for version 7 and higher) or ELOP II Factory (for older versions).
- Communication: Includes integrated 100 Base-TX Ethernet ports with safeethernet support for securing data transmission across distributed architectures.
- Maintenance: Supports hot-swap functionality, allowing for online replacement without shutting down the entire system, alongside real-time LED diagnostics for fault tracking.
- Certifications: Certified by TÜV for applications up to SIL 3 (IEC 61508, IEC 61511, IEC 62061) and PL e (EN ISO 13849-1).
- Railway Standards: Complies with CENELEC SIL 4 requirements (EN 50126, EN 50128, EN 50129) for rail safety.
- Self-Diagnostics: Continuously monitors internal operating voltage and temperature to ensure hardware integrity.
- Fail-Safe Design: Primarily operates in Deenergize to Trip mode, meaning it does not require energy to perform its safety function in the event of a fault.
- Emergency Shutdown (ESD): Reliable logic for immediate process halts during hazardous surges.
- Burner Control (BCS/BMS): Managing startup and shutdown sequences for combustion and power plants.
- Fire & Gas (F&G): Certified to EN54 and NFPA72 for fire alarm and extinguishing systems.
- High-Integrity Pressure Protection (HIPPS): Protection against overpressure in pipelines and refineries.
- Railway Signaling: Real-time interlocking and track section safety monitoring.